Oregon Scientific BAR623PA Remain operational to -20F with adequate power, Data Transmission

Page 9

For best results:

•Insert the batteries and before you mount the sensor.

•Place the sensor out of direct sunlight and moisture.

•Do not place the sensor more than 98 feet (30 meters) from the main (indoor) unit.

•Position the sensor so that it faces the main (indoor) unit, minimizing obstructions such as doors, walls, and furniture.

•Place the sensor in a location with a clear view to the sky, away from metallic or electronic objects.

•Position the sensor close to the main unit during cold winter months as below-freezing temperatures may affect battery performance and signal transmission.

You may need to experiment with various locations to get the best results.

Standard Alkaline batteries contain significant amounts of water. Because of this they will freeze in low temperatures of approximately 10° F. Disposable Lithium batteries have a much lower threshold for temperature with an estimated freezing range of below -40°F. The Liquid Crystal Display in outdoor thermometers will

EN

remain operational to -20°F with adequate power.

Wireless ranges can be impacted by a variety of factors such as extremely cold temperatures. Extreme cold may temporarily reduce the effective range between the sensor and the base station. If the unit's performance fails due to low temperature, the unit will resume proper functioning as the temperature rises to within the normal temperature range (i.e. no permanent damage will occur to the unit due to low temperatures).

DATA TRANSMISSION

Data is sent from the sensor every 40 seconds. The reception icon shown in the Temperature Area shows the status.

ICON

DESCRIPTION

 

 

 

 

 

Main unit is searching

 

 

 

 

 

for the sensor

 

 

 

 

 

 

 

 

 

 

 

A Channel has been

 

 

 

 

 

found

 

 

 

 

 

 

--- show in Outdoor

The sensor cannot be

Temp Area

found. Search for the

 

 

 

 

 

sensor or check batteries

 

 

 

 

 

 

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Contents Introduction Product OverviewFront View Back View Projector Image Rotation knob Projection on / OFF switchLCD Display Remote Sensor THN122N Batteries Getting StartedAC Adaptor Adjust SettingsRemote Sensor THN122N SET UP SensorData Transmission Remain operational to -20F with adequate powerTurn Atomic Clock Signal on / OFF ClockSearch for Sensor Alarm Weather Forecast Silence AlarmMoon Phase TemperatureSelect Temperature Unit BacklightReset System Safety and CareProjection Unit Problem Symptom Remedy TroubleshootingMain Unit Dimensions SpecificationsRemote Sensor Dimensions TemperatureAbout Oregon Scientific PowerFCC Statement Declare that the product Declaration of ConformityAtomic Projection Clock with Weather Forecast Model BAR623PA Oregon Scientific. All rights reserved. P/N

BAR623PA specifications

The Oregon Scientific BAR623PA is an advanced weather station designed to keep you informed about the atmospheric conditions around you. This device combines aesthetic appeal with functionality, offering a sleek and modern design that fits seamlessly into any home or office environment.

One of the key features of the BAR623PA is its ability to provide accurate and up-to-date weather information. Equipped with a large LCD display, the station presents a variety of data points, including indoor and outdoor temperature readings, humidity levels, and a barometric pressure trend. The device uses advanced sensors that ensure precise measurements, allowing users to monitor their environment effectively.

A standout technology in the BAR623PA is its wireless transmission capability. The weather station connects to an external sensor that can be placed outdoors, allowing you to receive real-time weather updates without the need for cumbersome cables. This sensor typically operates on a frequency of 433 MHz, providing a reliable signal up to a distance of 100 meters, depending on environmental conditions. This feature enables users to place the sensor in the ideal location for optimal readings.

Another compelling characteristic of the BAR623PA is its forecasting ability. It uses a built-in barometer to gauge changes in air pressure, providing weather forecasts that can predict conditions up to 12 hours ahead. The forecast icons, displayed on the large screen, make it easy to interpret the information at a glance, whether it’s sunny, cloudy, or rainy.

Additionally, the BAR623PA features a comfort level indicator that helps you assess the quality of your indoor environment. This feature takes into account both temperature and humidity, offering insights into how comfortable your living space is, which can be particularly beneficial for allergy sufferers and those sensitive to changes in humidity.

The device also employs a user-friendly interface, including touch-sensitive buttons for easy operation. It’s powered either by batteries or an optional AC adapter, providing flexible options for users based on their preferences.

In conclusion, the Oregon Scientific BAR623PA is a versatile and stylish weather station that combines advanced technologies with user-focused features. Its accurate sensor readings, wireless transmission capabilities, and forecasting abilities make it an essential tool for anyone looking to stay informed about their local weather conditions while enhancing the comfort of their indoor environments. Whether for personal use or as a thoughtful gift, the BAR623PA is sure to impress with its performance and design.
Top Page Image Contents