Onkyo TX-SR303E instruction manual Advanced Setup, Speaker Distance, Speaker Levels

Page 49

Advanced Setup—Continued

Speaker Distance

To get the best from surround sound, it’s important that the sound from each speaker reaches the listener at the same time. To achieve this, you need to specify the dis- tance from each speaker to the listening position.

1

Measure and make a note of the

 

 

distance from each speaker to

 

the listening position.

 

 

2

Press the [RECEIVER] button fol-

 

 

lowed by the [SETUP] button on

 

 

 

the remote controller.

3 Use the Up and Down []/[ ] buttons to select “2. Sp Dis- tance,” and then press the [ENTER] button.

4

While “Unit” is displayed, use the

 

 

Left and Right [ ]/[ ] buttons to

 

select “feet” or “meters”.

feet: Distances in feet. Can be set from 1 to 30 feet in 1-foot steps.

meters: Distances in meters. Can be set from 0.3 to 9 meters in 0.3-meter steps.

5

Use the Down [

] button to

 

select “Front,” and use the Left

 

and Right [ ]/[

] buttons to

specify the distance for the “front speakers,” then press the Down [ ] button to select the next speaker.

6

Repeat step 5 for all speakers.

 

 

Note:

 

Speakers that you set to No or None in

 

the Speaker Configuration (page 32)

 

cannot be selected.

 

 

7

Press the [SETUP] button.

 

 

Setup closes.

 

 

Notes:

•The Center and Subwoofer distances can be set up to 5 ft. (1.5 m) more or less than the Front distance. For example, if the Front distance is set to 20 ft. (6 m), the Center and Subwoofer distances can be set between 15 and 25 ft. (4.5 and 7.5 m).

•The Surround distances can be set up to 5 ft. (1.5 m) more or 15 ft. (4.5 m) less than the Front distance. For example, if the Front distance is set to 20 ft. (6 m), the SurrRight and Surr Left distances can be set between 5 and 25 ft. (1.5 and 7.5 m).

Speaker Levels

With this function, you can adjust the volume of each speaker so that all speakers can be heard equally at the listening position.

Speaker levels cannot be adjusted while the AV receiver is muted.

1

Press the [RECEIVER] button fol-

 

 

lowed by the [SETUP] button on

 

the remote controller.

2

Use the Up and Down [ ]/[ ]

 

buttons to select “3. Level Cal,”

and then press the [ENTER] but- ton.

A pink noise test tone is output by the front left speaker.

3

Turn up the volume so that you

 

 

can hear the test tone suffi-

 

ciently.

 

While each speaker outputs the test

 

tone, its name appears on the display, as

 

shown.

 

 

 

 

 

 

 

 

 

 

 

 

49

Page 48 Page 50
Image 49
Page 48 Page 50
Contents TX-SR303 TX-SR303E Avis Important Safety InstructionsPower PrecautionsPrecautions Supplied AccessoriesFCC Information for User Table of Contents FeaturesFront Panel Front & Rear PanelsDisplay Front & Rear PanelsThis jack is for connecting an FM antenna These push terminals are for connecting an AM antennaThese push terminals are for connecting speaker set B Rear PanelInstalling the Batteries Before Using the AV receiverUsing the Remote Controller How to Use the Remote Controller Remote ControllerReceiver Mode Remote Controller DVD Mode This button sets the CD player or MD/CD recorder to Standby CD, MD, & CDR ModeThis button selects discs on a CD changer Play button Tape ModeStop button Reverse Play buttonEnjoying Home Theater Connecting Your SpeakersSpeaker Connection Precautions Connecting Your SpeakersSpeaker Configuration Attaching the Speaker LabelsConnecting a Powered Subwoofer Connecting SpeakerStrip 3/8 10 mm of insu Lation from the endsConnecting the Indoor FM Antenna Connecting AntennaConnecting the AM Loop Antenna Attach the FM antenna, as shown American ModelConnecting an Outdoor FM Antenna Connecting AntennaConnecting an Outdoor AM Antenna Using a TV/FM Antenna SplitterAbout AV Connections Connecting Your ComponentsOptical Digital Jacks AV Connection Color CodingConnecting Both Audio & Video Connecting Your ComponentsWhich Connections Should I Use? Audio Connection FormatsVideo Connection Connecting a TV or ProjectorMake video connection a Audio ConnectionDVD player Connecting a DVD playerDVD Composite video outputVCR Connecting a VCR or DVD Recorder for PlaybackVideo 1 Connecting a Camcorder, Games Console, or Other Device Connecting a VCR or DVD Recorder for RecordingMake video connection a Make audio connection a Video 3Video 2 CD Player, or Turntable with Built-in Phono Preamp Step Connecting a CD Player or TurntableCD player Turntable MM with built-in phono preamp Phono Preamp MC head amp or MC transformerCassette recorder, CDR, etc Connecting a Cassette, CDR, MiniDisc, or DAT RecorderConnecting the Power Cord Connecting Onkyo ComponentsFor connecting additional -compatible compo- nents Auto Power On/StandbyTurning On the AV Receiver Turning OnSmooth Operation in a Few Easy Steps Have you connected a component to a digital audio input?Assigning Digital Inputs to Input Sources First Time SetupChanging the TAPE/MD/CDR Display Lowed by the Setup button First Time SetupButtons to select Yes or No Press the Receiver button folSetup closes Press the Setup buttonPress the remote controller’s Test Tone but To test that all of the speakers are working properlyPlaying Your AV Components Select a suitable listening mode and enjoyBasic AV Receiver Operation Start playback on the source componentPlaying Your AV Components Using the Multichannel InputDisplaying Source Information Interpreting Surround Channel InformationTuning into Radio Stations Using the TunerListening to the Radio Presetting Radio Stations Deleting Presets Using the TunerSelecting Preset Stations Displaying Radio InformationWhat is RDS? Using RDS European models onlyProgram Types Used in Europe PTY You can also search for radio stations by type seeListening to Traffic News TP Displaying Radio Text RTFinding Stations by Type PTY Adjusting the Bass & Treble Setting the Display BrightnessCommon Functions Muting the AV ReceiverUsing Headphones Using the Sleep TimerAdjusting Speaker Levels Common FunctionsSelecting with the Remote Controller Using the Listening ModesSelecting Listening Modes Selecting on the AV receiverUse this mode when playing game discs Using the Listening ModesAbout the Listening Modes Onkyo Original DSP ModesDTS Using the Audio Adjust Functions Adjusting the Listening ModesInput Channel Settings Using the Late Night Function Dolby Digital only Adjusting the Listening ModesUsing the CinemaFILTER PL II Music Mode SettingsRecording the Input Source RecordingRecording from Different AV Sources Advanced Speaker Settings Advanced SetupCrossover Frequency Double BassSpeaker Distance Advanced SetupSpeaker Levels Digital Input Signal Formats Troubleshooting Troubleshooting Sound changes when I connect my head- phones? Remote controller doesn’t work?Can’t control other components? Can’t record?Amplifier Section SpecificationVideo Section Tuner SectionMemo Onkyo Europe Electronics GmbH Onkyo U.S.A. CorporationOnkyo Europe UK Office Onkyo China Limited

TX-SR303, TX-SR303E specifications

The Onkyo TX-SR303 and TX-SR303E are part of Onkyo's well-regarded lineup of home theater receivers, designed to deliver exceptional audio performance and versatility for both music and movie enthusiasts. With an emphasis on user-friendly interfaces and high-quality sound reproduction, these models are ideal for consumers seeking an immersive home entertainment experience without breaking the bank.

One of the standout features of the TX-SR303 is its robust 5.1-channel surround sound capability. This allows users to set up a comprehensive audio system with support for multiple speakers, including those for front, center, and surround channels, creating a rich soundstage that enhances the viewing experience of films and multimedia content. The unit is equipped with advanced decoding technology that supports popular audio formats, including Dolby Digital and DTS, ensuring that audiences can enjoy their favorite content with precise sound clarity.

In addition to its impressive audio capabilities, the TX-SR303 boasts a variety of connectivity options. With multiple HDMI inputs, users can easily connect their Blu-ray players, gaming consoles, and streaming devices while supporting high-definition video formats, including 4K pass-through. The receiver also includes legacy input options, such as RCA and optical, allowing it to integrate seamlessly with older components and systems.

The TX-SR303's user-friendly setup and calibration features make it suitable for both novice and experienced users. The inclusion of an intuitive on-screen setup menu guides users through the installation process, while the built-in calibration technology helps optimize speaker settings based on the specific acoustics of the room, ensuring that every note and sound effect is heard at its best.

Moreover, the TX-SR303 is designed with energy efficiency in mind. Its eco-friendly features reduce power consumption during idle periods, contributing to long-term sustainability while still providing the performance expected from a high-quality receiver.

Overall, the Onkyo TX-SR303 and TX-SR303E reflect a perfect balance of technology, user-friendliness, and performance, making them standout choices for anyone looking to enhance their home entertainment setup.
Top Page Image Contents