Onkyo TX-SR303E instruction manual Troubleshooting

Page 52

Troubleshooting—Continued

There’s no sound with a certain signal format?

•Check the digital audio output setting on the con- nected device. On some games consoles, such as those that can play DVDs, the default setting is off.

•With some DVD-Video discs, you need to select an audio output format from a menu.

Can’t get 5.1-channel playback?

•When speaker B is turned on, speaker set A is reduced to 2.1-channel playback.

The volume cannot be set to 79?

•When the levels of all speakers have been calibrated (pages 41, 49), the maximum volume setting may change.

Noise can be heard?

•Using cable ties to bundle audio cables with power cords, speaker cables, and so on may degrade the audio performance, so don’t do it.

•An audio cable may be picking up interference. Try repositioning your cables.

The Late Night function doesn’t work?

•Make sure the source material is Dolby Digital (page 46).

The DVD analog multichannel input doesn’t work?

•Check the DVD analog multichannel input connec- tions (page 23).

•To select the DVD analog multichannel input, press the [MULTI CH] input selector button.

•Check the audio output settings on your DVD player.

About DTS signals

•When DTS program material ends and the DTS bit- stream stops, the AV receiver remains in DTS listen- ing mode and the DTS indicator remains on. This is to prevent noise when you use the pause, fast forward, or fast reverse function on your player. If you switch your player from DTS to PCM, because the AV receiver does not switch formats immediately, you may not hear any sound, in which case you should stop your player for about three seconds, and then resume play- back.

•With some CD players, you won’t be able to playback DTS material properly even though your player is con- nected to a digital input on the AV receiver. This is usually because the DTS bitstream has been processed (e.g., output level, sampling rate, or frequency response changed) and the AV receiver doesn’t recog- nize it as a genuine DTS signal. In such cases, you may hear noise.

•When playing DTS program material, using the pause, fast forward, or fast reverse function on your player

may produce a short audible noise. This is not a mal- function.

Video

There’s no picture?

•Make sure that all video connecting plugs are pushed in all the way (page 20).

•Make sure that each video component is properly con- nected.

•On your TV, make sure that the video input to which the AV receiver is connected is selected.

Tuner

Reception is noisy, stereo FM reception suffers from hiss, or the FM STEREO indicator doesn’t appear?

•Relocate your antenna.

•Move the AV receiver away from your TV or com- puter.

•Listen to the station in mono (page 36).

•When listening to an AM station, operating the remote controller may cause noise.

•Passing cars and airplanes can cause interference.

•Concrete walls weaken radio signals.

•If nothing improves the reception, install an outdoor antenna.

52

Page 51 Page 53
Image 52
Page 51 Page 53
Contents TX-SR303 TX-SR303E Important Safety Instructions AvisPrecautions PowerPrecautions Supplied AccessoriesFCC Information for User Features Table of ContentsFront & Rear Panels Front PanelFront & Rear Panels DisplayThese push terminals are for connecting an AM antenna This jack is for connecting an FM antennaThese push terminals are for connecting speaker set B Rear PanelInstalling the Batteries Before Using the AV receiverUsing the Remote Controller How to Use the Remote Controller Remote ControllerReceiver Mode Remote Controller DVD Mode This button sets the CD player or MD/CD recorder to Standby CD, MD, & CDR ModeThis button selects discs on a CD changer Tape Mode Play buttonStop button Reverse Play buttonConnecting Your Speakers Enjoying Home TheaterConnecting Your Speakers Speaker Connection PrecautionsSpeaker Configuration Attaching the Speaker LabelsConnecting Speaker Connecting a Powered SubwooferStrip 3/8 10 mm of insu Lation from the endsConnecting Antenna Connecting the Indoor FM AntennaConnecting the AM Loop Antenna Attach the FM antenna, as shown American ModelConnecting Antenna Connecting an Outdoor FM AntennaConnecting an Outdoor AM Antenna Using a TV/FM Antenna SplitterConnecting Your Components About AV ConnectionsOptical Digital Jacks AV Connection Color CodingConnecting Your Components Connecting Both Audio & VideoWhich Connections Should I Use? Audio Connection FormatsConnecting a TV or Projector Video ConnectionMake video connection a Audio ConnectionConnecting a DVD player DVD playerDVD Composite video outputVCR Connecting a VCR or DVD Recorder for PlaybackVideo 1 Connecting a VCR or DVD Recorder for Recording Connecting a Camcorder, Games Console, or Other DeviceMake video connection a Make audio connection a Video 3Video 2 Connecting a CD Player or Turntable CD Player, or Turntable with Built-in Phono Preamp StepCD player Turntable MM with built-in phono preamp Phono Preamp MC head amp or MC transformerConnecting a Cassette, CDR, MiniDisc, or DAT Recorder Cassette recorder, CDR, etcConnecting Onkyo Components Connecting the Power CordFor connecting additional -compatible compo- nents Auto Power On/StandbyTurning On Turning On the AV ReceiverSmooth Operation in a Few Easy Steps Have you connected a component to a digital audio input?Assigning Digital Inputs to Input Sources First Time SetupChanging the TAPE/MD/CDR Display First Time Setup Lowed by the Setup buttonButtons to select Yes or No Press the Receiver button folPress the Setup button Setup closesPress the remote controller’s Test Tone but To test that all of the speakers are working properlySelect a suitable listening mode and enjoy Playing Your AV ComponentsBasic AV Receiver Operation Start playback on the source componentUsing the Multichannel Input Playing Your AV ComponentsDisplaying Source Information Interpreting Surround Channel InformationTuning into Radio Stations Using the TunerListening to the Radio Using the Tuner Presetting Radio Stations Deleting PresetsSelecting Preset Stations Displaying Radio InformationUsing RDS European models only What is RDS?Program Types Used in Europe PTY You can also search for radio stations by type seeListening to Traffic News TP Displaying Radio Text RTFinding Stations by Type PTY Setting the Display Brightness Adjusting the Bass & TrebleCommon Functions Muting the AV ReceiverUsing the Sleep Timer Using HeadphonesAdjusting Speaker Levels Common FunctionsUsing the Listening Modes Selecting with the Remote ControllerSelecting Listening Modes Selecting on the AV receiverUsing the Listening Modes Use this mode when playing game discsAbout the Listening Modes Onkyo Original DSP ModesDTS Using the Audio Adjust Functions Adjusting the Listening ModesInput Channel Settings Adjusting the Listening Modes Using the Late Night Function Dolby Digital onlyUsing the CinemaFILTER PL II Music Mode SettingsRecording the Input Source RecordingRecording from Different AV Sources Advanced Setup Advanced Speaker SettingsCrossover Frequency Double BassSpeaker Distance Advanced SetupSpeaker Levels Digital Input Signal Formats Troubleshooting Troubleshooting Remote controller doesn’t work? Sound changes when I connect my head- phones?Can’t control other components? Can’t record?Specification Amplifier SectionVideo Section Tuner SectionMemo Onkyo U.S.A. Corporation Onkyo Europe Electronics GmbHOnkyo Europe UK Office Onkyo China Limited

TX-SR303, TX-SR303E specifications

The Onkyo TX-SR303 and TX-SR303E are part of Onkyo's well-regarded lineup of home theater receivers, designed to deliver exceptional audio performance and versatility for both music and movie enthusiasts. With an emphasis on user-friendly interfaces and high-quality sound reproduction, these models are ideal for consumers seeking an immersive home entertainment experience without breaking the bank.

One of the standout features of the TX-SR303 is its robust 5.1-channel surround sound capability. This allows users to set up a comprehensive audio system with support for multiple speakers, including those for front, center, and surround channels, creating a rich soundstage that enhances the viewing experience of films and multimedia content. The unit is equipped with advanced decoding technology that supports popular audio formats, including Dolby Digital and DTS, ensuring that audiences can enjoy their favorite content with precise sound clarity.

In addition to its impressive audio capabilities, the TX-SR303 boasts a variety of connectivity options. With multiple HDMI inputs, users can easily connect their Blu-ray players, gaming consoles, and streaming devices while supporting high-definition video formats, including 4K pass-through. The receiver also includes legacy input options, such as RCA and optical, allowing it to integrate seamlessly with older components and systems.

The TX-SR303's user-friendly setup and calibration features make it suitable for both novice and experienced users. The inclusion of an intuitive on-screen setup menu guides users through the installation process, while the built-in calibration technology helps optimize speaker settings based on the specific acoustics of the room, ensuring that every note and sound effect is heard at its best.

Moreover, the TX-SR303 is designed with energy efficiency in mind. Its eco-friendly features reduce power consumption during idle periods, contributing to long-term sustainability while still providing the performance expected from a high-quality receiver.

Overall, the Onkyo TX-SR303 and TX-SR303E reflect a perfect balance of technology, user-friendliness, and performance, making them standout choices for anyone looking to enhance their home entertainment setup.
Top Page Image Contents