
First-time installation
Switching on for the first time and getting started
•Plug in your Mediamaster and the
•Press ok to continue.
•Select the desired menu language using the cursor up/down button.
•This will also become the main language for audio and subtitling.
•Press ok to continue.
Antenna/satellite selection
•Select the “One antenna/one LNB configuration” alternative if you have a single antenna equipped with one LNB for receiving signals.
•Select the “Multisatellite/DiSEqC switch configuration” alter- native if you have one antenna with two or four LNBs or two antennas with one or two LNBs each for receiving signals from a combination of satellites. In these cases you will also need a
One antenna/one LNB configuration
Select this alternative if you have one (1) LNB mounted on the antenna.
LNB type
Select the correct LNB for your configuration. The most common values, including Universal LNB, can be selected using the cursor left/right button.
LNB offset voltage
If the cable from the antenna is very long, the voltage at the LNB could be too low to change the polarisation. You can increase the voltage to the LNB by 0.5 V.
Satellite
Select one of the
GB 8