Planar PD7010 user manual Description Default

Item	Description	Default
Auto source	Press the cursor ◄ ► button to enable auto source selection.	Off
selection
	Press the cursor button ◄ ► to manually select the source. The
	following screen appears.

	Press the cursor button ▲▼ to move up and down the menu.
	Press the cursor button to select an input source:
	RGB: select RGB input to display images from a computer.
	DVI: select Digital Video Input for digital display quality.
	HDMI: select High-Definition Multimedia Interface. HDMI is a
Source select	digital, point-to-point interface for video signals designed as a	—
	single-cable solution for home theater and consumer electronics
	equipment.
	Component: select component video as the input source.
	Component video maintains the three YUV video signals in three
	separate channels and provides a sharper image than compos-
	ite video and S-Video.
	Video: select composite video as the input source. Composite
	video combines all three YUV video signals into one channel.
	NTSC, PAL and SECAM television are examples of composite
	video sources. S-Video and component video provide a sharper
	image than composite video.
	S-Video:select Super Video as the input source. S-Video com-
	bines the three YUV video signals into two channels. S-Video
	provides a sharper image than composite video, but is not as
	good as component video.
	SCART: SCART connectors are prevalent in Europe. SCARTs
	are used to hook up VCRs and DVD players to TV sets.
	Hot Key Settings: Press the cursor button to set hot keys.
Source enable	Press Enter to enable selection of the source (Auto source selec-	Full
	tion must be enabled).

23