Planar PD7010 user manual Resetting the Lamp, Cleaning the Projector, Cleaning the Lens

Page 33

Resetting the Lamp

After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following:

1.

2.

3.

4.

5.

Press the Menu button to open the OSD menu.

Press the cursor ◄ ► button to move to the Service menu.

Press the cursor ▲▼ button to move down to Lamp Hour Reset.

Press the cursor ◄ ► or Enter button. A message screen appears.

Press the cursor buttons in this order: ▼ ▲ ◄ ►.

The Status menu appears again showing the Lamp Hours reset to zero.

Cleaning the Projector

Cleaning the projector to remove dust and grime will help ensure trouble-free operation.

1.Be sure to turn off and unplug the projector at least an hour before clean- ing. Failure to do so could result in a severe burn.

2.Use only a dampened cloth when cleaning. Do not allow water to enter the ventilation openings on the projector.

3.If a little water gets into the projector interior while cleaning, leave un- plugged in a well-ventilated room for several hours before using.

4.If a lot of water gets into the projector interior when cleaning, have the pro- jector serviced.

Cleaning the Lens

You can purchase optic lens cleaner from most camera stores. Refer to the following to clean the projector lens.

1.Apply a little optic lens cleaner to a clean soft cloth. (Do not apply the cleaner directly to the lens.)

2.Lightly wipe the lens in a circular motion.

CAUTION

1.Do not use abrasive cleaners or solvents.

2.To prevent discoloration or fading, avoid getting cleaner on the projector case.

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents PD4010 PD7010 PD7060 Planar Systems, Inc Copyright Symbols UsedPower Safety General Safety InformationCleaning the Projector Replacing the LampCables, Replacement Lamps and Accessories Table of Contents Packing Checklist Front-right View Tour of the ProjectorOn-screen Display OSD Buttons DVI-D Rear PortsBottom View Remote Control Functions Projector and Remote Control Buttons Remote Control Operating RangeInserting the Remote Control Batteries Connecting Input Devices Starting and Shutting down the Projector Take note of the following when setting up the projector Adjusting the Projector LevelZoom Focus Adjusting the Focus and ZoomNavigating the OSD OSD Menu ControlsSetting the OSD Language 3HDMI OSD Menu OverviewImage Menu Description Default Scart OSD menu Functions Available for Connected SourceDisplay Menu Setup Menu Functions Available for Connected Source Advanced Menu Language Menu User Color Menu Service Menu Replacing the Projection Lamp Page Resetting the Lamp Cleaning the ProjectorCleaning the Lens Using the Kensington Lock Troubleshooting Tips for TroubleshootingLED Flash LED Error MessagesCommon Problems and Solutions Image ProblemsLamp Problems Remote Control Problems PD7060 Hardware SpecificationsPD4010 PD7010 PD7060 Input/output ConnectorsPD4010 Projection distance and size table PD7010. PD7060 Timing Mode Table Projector Dimensions FCC Warning Safety CertificationsCanada EN 55022 WarningPlanar Systems, Inc

PD7010 specifications

The Planar PD7010 is a state-of-the-art digital signage display designed to deliver high-quality visuals in various commercial environments. With a screen size of 70 inches, this display is ideal for capturing attention in retail stores, corporate lobbies, or public spaces. One of its standout features is the 4K Ultra HD resolution, which provides stunning image clarity and detail, making it perfect for showcasing vivid graphics, videos, and promotions.

The Planar PD7010 utilizes advanced LED backlighting technology that not only enhances the brightness but also improves energy efficiency. This display offers wide viewing angles, ensuring that content can be viewed comfortably from different positions, which is essential in locations with large foot traffic. The full-array LED backlighting ensures that colors are vibrant, with deep blacks and bright whites, delivering an immersive viewing experience.

This digital signage solution is equipped with Planar's proprietary technology that optimizes color accuracy and uniformity, further enhancing the visual appeal. The PD7010 also features a durable design, built to withstand the demands of continuous operation often required in commercial settings. With a sleek and modern appearance, the display fits seamlessly into any décor while providing a professional presentation.

Another key characteristic of the Planar PD7010 is its versatile connectivity options. It includes a variety of inputs such as HDMI, DisplayPort, and USB, allowing for easy integration with various media players, computers, and other signage solutions. This flexibility ensures that users can quickly set up and adjust their displays to meet their evolving needs.

The Planar PD7010 supports various content management systems, allowing users to push updates and manage media remotely, improving operational efficiency. Its user-friendly interface simplifies content scheduling, making it convenient for users to display dynamic information.

Overall, the Planar PD7010 is a cutting-edge digital signage display that combines impressive visual technology with robust features tailored for commercial use. Whether for advertising, information sharing, or entertainment, it provides an impactful solution that is sure to engage and inform audiences effectively.
Top Page Image Contents