1. You are required to implement above steps of resolution setting of computer first.
2. Switch the Notebook PC display to the “external display only” or “CRT only” mode.
4 If you are experiencing difficulty in changing resolutions or your monitor freezes, restart all the equipment and the projector.
22
4
If you are using a PC:
If the resolution of your computer is higher than 800 x 600. Follow the steps outlined below to reset the resolution.
For Windows 3.x:
1. In the Windows Program Manager, click the “Windows Setup” icon in the Main group.
2. Verify that your display resolution setting is less than or equal to 800 x 600. For Windows 95:
1. Open “My Computer” icon, the “Control Panel” folder, and then double click the “Display” icon.
2. Select the “Setting” tab.
3. In the “Desktop Area” you will find the resolution setting. Verify that the resolution setting is less than or equal to 800 x 600 resolution.
If the projector is still not projecting the whole image, you will also need to change the monitor display you are using. Refer to the following steps.
4. Follow above steps 1~2. Click on the “Advanced Properties” button.
5. Select the “Change” button under the “Monitor” tab .
6. Click on “Show all devices”. Then select “Standard monitor types” under the “Manufactures” box ; choose the resolution mode you need under the “Models” box.
7. Verify that the resolution setting of the monitor display is less than or equal to 800 x 600.
If you are using a Notebook PC:
4
4
Press the “Re-Sync” button on the Remote Control.
Problem : Partial, scrolling or incorrectly displayed image.
4
Make sure you have removed the lens cap and the projector is switched on.
connected as described in the “Installation” section.
4 Ensure the pins of connectors are not crooked or broken.
4 Check if the projection lamp has been securely installed. Please refer to the “Changing the lamp” section.
4
Ensure all the cables and power connections are correctly and securely
Problem : No image appears on screen.
or
Troubleshooting
If you are experiencing trouble with the projector, refer to the following. If the problem persists, please contact your local dealer Optoma service center.
English