English 
vTurn on the projector first and then the computer.
Installation
Power On/Off the Projector
Powering On the Projector
1.Remove the lens cap.Œ
2.Ensure that the power cord and signal cable are securely connected.
3.Turn on the main power switch on the side of the projector and allow the projector to warm up for
4.Turn on the lamp by pressing “Power/Standby” button on the control panel. Ž
The startup screen will display and count down for 20 seconds and the Power/Standby indicator will light solid amber.
The “LAMP” LED indicator will light solid green.
5.Turn on your source (computer, notebook, or video player ,etc.). The projector will detect your source automatically.
vIf the screen displays “No Signal” , please make sure the signal cables are securely connected.
vIf you connect multiple sources at the same time, use the “Source” button on the Remote Control or Panel Control to switch.
3 Power / Standby
2
Power Switch
Lens cap | 1 |
9