Using an RIHD- compatible TV, Player, or Recorder
p, which stands for Remote Interactive over HDMI, is the name of the system control function found on Onkyo components. The AV receiver can be used with CEC (Consumer Electronics Control), which allows system control over HDMI and is part of the HDMI standard. CEC provides interoperability between various components, however, operation with components other than
About p-compatible components
The following components are
■TV
•Toshiba TV
•Sharp TV
■Players/Recorders
•Onkyo and Integra
•Toshiba players and recorders (only when used together with Toshiba TV)
•Sharp players and recorders (only when used together with Sharp TV)
*Models other than those mentioned above may have some interoperability if compatible with CEC which is part of the HDMI Standard, but operation cannot be guaranteed.
Note
•For proper linked operations, do not connect more p- compatible components than the quantities specified below, to the HDMI input terminal.
–
–
–Cable/Satellite
•Do not connect the AV receiver to the other AV receiver/AV amplifier via HDMI.
•Proper linked operations are not guaranteed when more
Appendix
Operations that can be performed with
pconnection
■For p-compatible TV
The following linked operations are enabled by connecting the AV receiver to an
•The AV receiver will enter standby mode when the power of the TV is turned to standby.
•You can set on the menu screen of the TV to either output the audio from the speakers connected to the AV receiver, or from the speakers of the TV.
•It is possible to output the video/audio coming from the antenna or from the input jack of the TV from the speakers connected to the AV receiver. (A connection such as optical digital cable or similar is required above the HDMI cable.)
•Input to the AV receiver can be selected with the remote controller of the TV.
•Operations such as volume adjustment or similar for the AV receiver can be performed from the remote controller of the TV.
■For p-compatible players/recorders
The following linked operations are enabled by connecting the AV receiver to an
•When the playback is started on the player/recorder, input of the AV receiver will switch to the HDMI input of the player/recorder that is playing back.
•Operation of the player/recorder is possible using the remote controller supplied with the AV receiver.
*Depending on the model used, not all operations may be available.
To be continued