Installation
Powering On/Off the Projector
| Powering On the Projector |
1. | Remove the lens cap. |
2. | Ensure that the power cord and signal cable are securely |
| connected. The Power LED will turn red. |
3. | Turn on the lamp by pressing “Power/Standby” button on |
| the control panel. And the Power LED will turn green. |
4. | Turn on your source (computer, notebook, video player, |
Text Pattern | etc.). The projector will detect your source automatically |
within “Management” menu; check that “Source Lock” has been set to “Off”.
If the screen displays “No Signal”, please make sure the signal cables are securely connected.
To access the
If you connect multiple sources at the same time, use the “Source” button on the control panel or direct source key on remote control to switch.
Turn on the projector first and then the signal
sources.
1 | 2 |
Lens Cap | Power/Standby |
English 14