Optoma Technology TX780 appendix Local Area Network LAN

User Controls

For example: Use Microsoft Internet Explorer (IE) web browser to control the projector , the IP address is http: // 10.0.50.100.

Step 1: Find an IP Address (10.0.50.100) from LAN function of projector.

Step 2: Select apply and press "Enter" button to submit function or press "menu" key to exit.

Step 3: To open Network Connections, click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections. Click the connection you want to configure, and then, under Network Tasks , click Change settings of this connection.

Step 4: On the General tab, under This connection uses the following items, click Internet Protocol (TCP/IP), and then click

"Properties."

Step 5: Click Use the following IP

address, and type in as below:

1)IP address: 10.0.50.XXX

2)Subnet mask: 255.255.0.0

3)Default gateway: 10.0.50.254

Step 6: To open Internet Options, click IE web browser, click Internet Options, click the Connections tab and click "LAN Settings."

Step 7: The Local Area Network (LAN)

Setting dialog box appears, In the Proxy Server area, cancel the

Use a proxy server for your LAN check box., then click "OK" button

twice.

Step 8: Open your IE and type in the IP address of 10.0.50.100 in the URL then press "Enter" key. The web page will display as below:

Step 9: Open "Control Panel" to control your projector.

35English