Optoma Technology TX783RFBA, EP783 manual Usage Notice, Safety Information

Usage Notice

Safety Information

The lightning flash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magni- tude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of import operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THE PROJECTOR TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

Class B emissions limits

This Class B digital apparatus meets all requirements of the Canadian Inter- ference-Causing Equipment Regulations.

Important Safety Instruction

1.Read these instructions –before using this projector.

2.Keep these instructions –for future reference.

3.Follow all instructions.

4.Install in accordance with the manufacturer’s instructions :

A.Do not block any ventilation openings. To ensure reliable operation of the projector and to protect it from overheating, put the projector in a position and location that will not interfere with its proper ventilation.

For example, do not place the projector on a bed, sofa, carpet, or similar surface that may block the ventilation openings. Do not put it in an enclosure, such as a bookcase or a cabinet that may keep air from flowing through its ventilation openings.

B.Do not use this projector near water or moisture. To reduce the risk of fire or electric shock, do not expose the projector to rain or moisture.

C.Do not install near any heat sources, such as radiators, heaters, stoves or other apparatus (including amplifiers) that produce heat.

5.Clean only with a dry cloth.

6.Only use attachments/accessories specified by the manufacturer.

7.Refer all servicing to qualified service personnel. Servicing is required when the projector has been damaged in any way:

Such as power supply cord or plug is damaged.

Liquid has been spilled or objects have fallen into the apparatus.

The projector has been exposed to rain or moisture, does not operate normally, or has been dropped.

Do not attempt to service this projector yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Optoma to be referred to an authorized service center near you.

8.Do not let objects or liquids enter the projector –as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock.

9.See projector enclosure for safety related markings.

10.The projector should not be adjusted or repaired by anyone except prop- erly qualified service personnel.

Engl

2

i

s

h