Optoma Technology TX779P3D Adjusting the Projected Image, Adjusting the Projector’s Height,  

Installation

Adjusting the Projected Image

Adjusting the Projector’s Height

The projector is equipped with elevator foot for adjusting the image height.

To raise the image:

1.Lift the projector u.

2.Press the elevator button v.

3.Raise the image to the desired height angle, the elevator foot drops down w.

3.Fine-tune the display angle and then release the button to lock the elevator foot into position.

To lower the image:

Press the height-adjuster button and push down on the top of the projector.

To adjust the angle of the image:

Turn the tilt-adjuster x right or left until the desired angle has been achieved.

 

17English