Upgrade Firmware
Software updates can be obtained from the OPTOMA website (www.optoma.com / www.optoma.eu /www.optoma.com.tw).
1.On your computer, create a folder named "upgrade".
2.Download the latest firmware from www.optoma.com and save it in the "upgrade" folder.
3.Copy the "upgrade" folder to the root folder of the SD card.
4.Insert the SD card into the SD card slot of the projector.
5.Follow the steps below.
1. Select "Setup" | 2. Enter "Setup" Menu | 3. Select "System" |
Home menu
6.Enter "Upgrade" Menu
5. Select "Upgrade" | 4. Enter "System" Menu |
7. Confirm Upgrade | 8. Wait to Complete |
No
Select item
Yes
<Note>
•• A "No new firmware is found" message appears if there is no update file in the SD card.
•• Do not touch any buttons or turn off the projector while upgrading is in progress. Otherwise, this may damage the projector.
•• Do not remove the SD card until the upgrade is complete.
Upgrade may take a while
to complete
Return to
Home menu
Reboot the projector
17