Optoma Technology ML500 Connect Computer for USB Display Insert SD Card, Mount the Projector

You can project your computer display using the projector's mini USB port.

1Connect a laptop or PC using the supplied mini-USB to USB Type-A cable.

2.Turn on the projector.

3.Press /// to highlight mini-USB> USB Display

and press to enter USB display mode.

See "USB Display Mode" section in "USB Mode" on page 18.

By default, the projector displays from the internal memory. However if an SD card is inserted, the projector reads from the SD card first.

Insert an SD card into the slot with the gold contacts facing down.

<Note>

•• To remove the SD card, push the card to eject it from the slot.

•• Do not remove the SD card while the projector is projecting image from the card. This can cause data loss or damage the card.

•• Supports SD card size up to 32GB.

•• The SD card is not included in the package.

Connect Computer for Data Transfer

Insert USB Flash Drive

Plug a USB flash drive into the USB

Type A port at the back of projector.

<Note>

Support USB flash drive with FAT32 and

NTSF format.

Mount the Projector

You can transfer data to the projector internal memory or the SD card.

1.Connect a laptop or PC using the supplied mini-USB to USB Type-A cable.

2.Turn on the projector.

3.Press /// to highlight mini-USB> Data Transfer

and press to enter data transfer mode.

4.Browse for Removable Disk.

5.Copy the files to your computer.

See "Data Transfer Mode" section in "USB Mode" on page 18.

<Note>

The laptop/PC can only detect the input source when the projector is switched on.

Screw hole for tripod

Screw a standard tripod into the screw hole on the projector.

Screw holes for ceiling mount

*Standard Tripod

*Ceiling Mount