User Controls
SETUP Security
Password default value is “1234” (first time).
Security
On: Choose “On” to use security verification when the turning on the projector.
Off: Choose “Off” to be able to switch on the projector without password verification.
Security Timer
Use this function to set the how long (Month/Day/Hour) the projector can be used. Once this time has elapsed you will be requested to enter your password again.
Change Password
First time:
1.Press “
” to set the password.
2.The password has to be 4 digits.
3.Use number button on the remote to enter your new password and then press “
” key to confirm your password.
Change Password:
1.Press “
” to input old password.
2.Use number button to enter current password and then press “
” to confirm.
3.Enter new password (4 digits in length) using the number buttons on the remote, then press “
” to confirm.
4.Enter new password again and press “
” to confirm.
English 38