Optoma Technology TX330 manual Powering On/Off the Projector, Powering On the Projector, Lens Cap

Page 13

Installation

Powering On/Off the Projector

Powering On the Projector

1.Open the lens cap. 

2.Ensure that the power cord and signal cable are securely connected.  The Power LED will be Amber.

3.Turn on the lamp by pressing “Power” button either on the top of the projector or pressing “Power” button on the remote. The Power LED will flash green.

The startup screen will display in approximately 10 seconds. The first time you use the projector, you can select your preferred language from quick menu after the startup screen display.

4.Turn on your source (computer, notebook, video player, etc.). The projector will detect your source automatically.

If the screen displays “No Signal”, please make sure the signal cables are securely connected.

If you connect multiple sources at the same time, press the “Source” button on the control panel or direct source key on the remote control to switch between inputs.

2 Power

 Turn on the projector first and then select the signal sources.

Power LED

1 Lens Cap

13 English

Image 13

Contents Table of Contents Important Safety Instruction Safety InformationsClass B emissions limits Precautions Don’t Eye Safety Warnings Introduction Documentation Package OverviewMain Unit Product OverviewControl Panel Connection Ports Remote Control Connecting the Projector InstallationPowering On the Projector Powering On/Off the ProjectorPower Lens CapPowering off the projector Adjusting the Projector’s Height Adjusting the Projected ImageAdjusting Projection Image Size Adjusting the Projector’s Zoom / FocusKeystone Adjust image distortion caused by tilting Control Panel & Remote ControlEnter Four DirectionalButton LaserPC/ Mouse ControlFour Direc VideoTional Select Keys VideoOn-screen Display Menus How to operateMenu Tree Image Display ModeBrightness ContrastColor Image ColorDegamma Image AdvancedWhite Peaking Color TempInput Source Enable input sources. Press into the next menu as belowFormat DisplayInput Signal Zoom OverscanImage Shift KeystonePC Mode Language SetupMenu Location ProjectionPhase Setup SignalFrequency PositionSecurity Timer Setup SecuritySecurity First Time Change PasswordOptions Auto Power Off min Direct Power OnSleep Timer min Options AdvancedOptions Lamp Settings Image Problems TroubleshootingNo image appears on-screen Partial, scrolling or incorrectly displayed imageImage has vertical flickering bar Image is unstable or flickeringImage is out of focus Image is stretched when displaying 169 DVD titleImage is too small or too large Image has slanted sidesProjector Status Indication Intermission ProblemsProjector stops responding to all controls Lamp burns out or makes a popping soundMessage Reminders If the remote control does not work Remote Control ProblemsReplacing the lamp Lamp Replacement Procedure  Computer Compatibility Compatibility Modes Video Compatibility Optoma Global Offices Korean Regulation & Safety notices Remarque à l’intention des utilisateurs canadiens