Optoma Technology EP718 specifications Connecting the Projector to Other Video Sources

Page 11

11

English

Connecting the Projector to Other Video Sources

vIf your video player uses a round, one-prong composite video connector, you’ll need the video cable. If your video player uses a round, four-prong s-video connector, you’ll need the s-video cable ( See page 12 for detail information).

Both cables are shipped with the projector.

If you use the video cable:

1.Plug the video cable connector into the “Video out”port on your video player; plug the other end into the “Video”port on your projector.

2.Plug the audio cable white connector into the left “Audio out” port on your video player; plug the cable’s red connector into the right “Audio out” port on the video player; plug the other end into the “Audio in” port on your projector.

3.If you need to use an external speaker (built in amplifier), plug the audio cable white connector into the “Audio in” port on your speaker; plug the cable’s red connector into the red “Audio in” port on the speaker; plug the other end into the “Audio out”

port on the projector.

4.Connect one end of the power cord into the back of projector; connect the other end to an electrical outlet.

VideoOutput AudioOutput

 

Audio In Port

Audio Cable

 

Video Cable

Video Port

Power Cord

 

Audio Cable

Audio Out Port

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Table of Contents Usage Notice PrecautionsIntroduction Product FeaturesPackage Overview Main Unit Product OverviewPanel Control Connection PortsRemote Control Laser Point Connecting the Projector to Desktop Computer InstallationConnecting the Projector to Portable Computer If you use the video cable Connecting the Projector to Other Video SourcesIf you use the s-video cable Powering On the Projection Display Power On/Off the Projection DisplayPowering Off the Projection Display Adjusting the Projector Height Adjusting the Projected ImageAdjusting the Projector Focus User Controls Zoom In Computer mode only VolumePIP Computer mode only ResetOSD Menus 4Tracking 4Tint Video mode only4Color Video mode only 4Volume4Treble 416 9 Video mode only44 3 Video mode only 4PIP Computer mode only4Exit Menu 4Lamp Reset4Reset All 4Lamp WarningAppendices Problem No image appears on screenProblem Partial, scrolling or incorrectly displayed image Problem Image is out of focus Problem Image is unstable or flickeringProblem Image has vertical flickering bar Problem The screen is outstretched when displaying 169 DVD To replace the lamp module, reverse the previous steps Lamp Changing ProcedureSpecifications Compatibility Modes
Top Page Image Contents