Image Problems, Battery Problems | Optoma Technology PK100 specs

Troubleshooting

English Dépannage

Français Fehlerbehebung

Deutsch

Solucionar problemas Español

If you experience a problem with your projector, please refer to the following information. If a problem persists, please contact your local reseller or service center.

Image Problems

No image appears on-screen

•Ensure the cables/charger/battery are correctly and securely connected.

•Ensure the pins of connectors are not crooked or broken.

•Make sure the projector is switched on.

Image is out of focus

•Adjust the Focus Dial.

•Make sure the projection screen is between the required distance 7.9 to 103.8 inches (0.2 to 2.636 meters) from the projector. See page 12.

Battery Problems

Battery capacity is low

•Remove the battery and clean the connectors.

•The battery is worn out and needs to be replaced. See page 5.

Si vous rencontrez des problèmes avec votre projecteur, référez-vous aux informations suivantes. Si le problème persiste, contactez votre revendeur local ou le centre de service.

Problèmes d’image

Aucune image n’apparaît sur l’écran.

•Vériﬁez que les câbles/le chargeur/ les piles sont correctement connectés/insérées.

•Vériﬁez si les broches des connecteurs sont tordues ou cassées.

•Vériﬁez que le projecteur est allumé. L’image est ﬂoue/pas au point

•Tournez la bague de mise au point.

•Vériﬁez que l’écran de projection se trouve à l’intérieur de la distance requise, entre 7,9 et 103,8 pieds (entre 0,2 et 2,636 mètres) du projecteur. Voir page 12.

Problèmes avec les piles

La capacité des piles est faible

•Enlevez les piles et nettoyez les connecteurs.

•Les piles sont usées et doivent être changées. Voir page 5.

Falls Probleme mit dem Projektor auftreten, beziehen Sie sich bitte auf folgende Information. Wenden Sie sich bitte an Ihren Händler oder das Kundendienstzentrum, wenn ein Problem sich nicht beseitigen lässt.

Bildprobleme

Es wird kein Bild angezeigt.

•Stellen Sie sicher, dass die Kabel/ das Ladegerät/ der Akku richtig verbunden sind.

•Überprüfen Sie, ob die Kontaktstifte der Anschlüsse verbogen oder abgebrochen sind.

•Stellen Sie sicher, dass der Projektor eingeschaltet ist.

Das Bild ist nicht fokussiert

•Betätigen Sie den Fokusring.

•Stellen Sie sicher, dass der Projektionsbildschirm mindestens 0,2 m (7,9 Zoll) und maximal 2,636 m (103,8 Zoll) von dem Projektor entfernt ist. Siehe Seite 12.

Akkuprobleme

Die Akkukapazität ist niedrig

•Entfernen Sie den Akku und reinigen die Kontakte.

•Der Akku ist abgenutzt und muss ersetzt werden. Siehe Seite 5.

Si experimenta un problema con su proyector, por favor, consulte la siguiente información. Si el problema persiste, por favor, póngase en contacto con su vendedor local o centro de servicio.

Problemas con la Imagen

No aparece ninguna imagen en la pantalla.

•Asegúrese de que los cables/ cargador/batería estén conectados correctamente y de forma segura.

•Asegúrese de que los pins de los conectores no están torcidos o rotos.

•Asegúrese de que el proyector esté encendido.

La imagen está desenfocada.

•Ajuste la Rueda de Enfoque.

•Asegúrese de que la pantalla de proyección está dentro de la distancia requerida de entre 7,9 y 103,8 pulgadas (0,2 y 2,636 metros) del proyector. Consulte la página 12.

Problemas con la Batería

La capacidad de la batería es baja.

•Extraiga la batería y limpie los conectores.

•La batería está agotada y necesita ser sustituida. Consulte la página 5.

PK100 specifications

The Optoma Technology PK100 is a highly compact and portable projector that caters to modern users looking for convenience without compromising on performance. Designed with versatility in mind, the PK100 is perfect for business presentations, classroom instruction, or personal entertainment. Its lightweight design, coupled with a compact footprint, allows users to easily carry it in a bag or briefcase, making it an ideal solution for on-the-go professionals and avid movie enthusiasts.

One of the standout features of the PK100 is its impressive brightness level, despite its small size. The projector boasts a brightness rating that ensures clear visibility in various lighting conditions. With sufficient lumens, users can enjoy vivid and colorful images, whether they're projecting in dimly lit rooms or mildly illuminated spaces. This capability makes the PK100 an excellent choice for both indoor and outdoor presentations.

The native resolution of the PK100 is another highlight, as it allows for crisp and detailed images. Supporting HD resolutions, the projector enhances content quality for videos, presentations, and images. This ensures that text is legible and visuals are sharp, creating an engaging viewing experience. Additionally, the compatibility with various input sources further extends its usability, supporting HDMI, VGA, and even mobile device connections, making it versatile for different scenarios.

In terms of technological advancements, the PK100 utilizes DLP (Digital Light Processing) technology, which enhances color accuracy and provides better contrast ratios. DLP projectors are known for their reliability and quality, and the PK100 is no exception. Users can expect consistent performance and longevity with this projector.

Battery life is another characteristic that sets the PK100 apart from many competitors. It comes with a built-in rechargeable battery that allows for hours of uninterrupted projection, making it perfect for those instances when power outlets are not readily available. The projector's intuitive controls and user-friendly interface ensure that users can set it up quickly and adjust settings easily.

Overall, the Optoma Technology PK100 stands out in the portable projector market with its combination of compact design, impressive brightness, and sharp image quality. Whether for professional or personal use, it offers a reliable and high-performance solution for anyone needing a projector on the move.