IMPORTANT SAFETY INSTRUCTIONS
•Read these instructions.
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water.
•Clean only with a dry cloth.
•Do not block any ventilation openings. Install in accordance with the manfacturer’s instructions.
•Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or
•Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
•Only use attachments/accessories specified by the manufacturer.
•Use only with the stand provided with the apparatus.
•Unplug this apparatus during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
•If servicing is required, please contact Hasbro Consumer Affairs at
•Do not look directly into the lens when the lamp is on.
•Keep plastic, paper, and combustible material at least 0.5 m (2 ft.) away from the projector lens and vents.
•Do not put anything on top of the projector.
•Use only enclosed power cord rated for the voltage and current marked on the product label.
•Do not stand the projector on its front surface.
•Do not touch the lens with your fingers. See “Cleaning the projector lens” on page 13.
•Do not open the projector except as instructed by this guide on page 14 and only after allowing the projector to cool down.
•Warnings and power rating information are located inside DVD compartment and on the bottom panel.
•Place the projector on the table top and open environment when it is operating.
2