Meridian Audio MF-10 manual For USA and Canada only, Power cord, For Europe only

Page 4

1	Getting Started

Safety Precautions (Continued)

POWER CONNECTION

For USA and Canada only

Use only the following power cord.

Power cord

WARNING:

THIS APPARATUS MUST BE EARTHED.

For Europe only

Use a certified main cord set complying with the national regulations of the countries and the rated voltage min. 200V, and min. dia. 0.75mm². Also ensure that the power cord plug is the correct type for the AC outlet in your country.

Consult your Meridian retailer.

4

Image 4

Contents Meridian MF-10 Digital Projector About the installation place Safety PrecautionsMachine Noise Information Germany only Do not allow any unqualified person to install the unit EnglishFor USA and Canada only Power cordFor Europe only Preparation Basic Operation Settings Troubleshooting Others Main Features Supports Multiple Digital DevicesPerfect for Any Location Contents How to Read this Manual/ Accessories/Optional Accessories Check the AccessoriesOptional Accessories About this Manual„ Front Side/Left Side Controls and Features„Rear Side/Top Surface „Bottom Surface Controls and Features „ Remote ControlEffective Range of Remote Control Unit How to Use the Remote ControlLoading Batteries Selecting Connecting Devices DVD RecorderConnecting via Video Cable and S-video Cable ConnectingConnecting via Component Video Cable Connecting via HDMI-DVI Conversion Cable Connecting via Hdmi CableDVD recorder Connecting via SCART-RCA Cable Connecting via RGB Video CableDVD player for European market Device equipped with RGB outputInstalling the Projector and Screen Install the projector and screenScreen Size and Projection Distance TipsInsert the power plug to the power outlet Projecting ImageAbout Cool Down mode Turn off the powerYou can hide the image Temporarily Convenient Features during Projection Setting the Screen SizeProject the image Masking the Surrounding Area of an ImageMask the image To endSetting Menu Display the setting menuProcedures for Menu Operation Select Source g AspectImage Image Adjust Setting MenuImage Color Temp Image Gamma GammaImage Pixel Adjust Setup Image ProfileSetup Profile Memory Image OffsetSetup Picture Position Setup Hdmi Input LevelSetup Mask Setup OverscanSource Aspect When SD video signals are being input Source V-Stretch When HD video signals are being inputSource Resize When PC signals are being input Source Film ModeInstall. Menu Position Install. Menu DisplaySource Color System Source Black LevelInstall. Line Display Install. Flip HInstall. Flip Install. High Altitude ModeFunc. Lamp Power Func. LogoFunc. Test Pattern Func. LanguageInfo. During video signal input Adjust image quality Other items can also be adjusted To endChanging the Default Image Profile Values Customizing Projected ImagesAdjust image quality Display the setting menuSelect Setup g Profile Memory g Save User1 Register the settingTroubleshooting Power is not suppliedProjected image is dark Video image does not appearRemote control does not work Power is cut off suddenlyVideo image is fuzzy Video images are missingWhat to Do When These Messages Are Displayed Message Cause DetailsActions to Be Taken for Warning Mode About Warning IndicatorsLamp Procedure for Lamp Replacement Replacing the LampRemove the lamp cover Loosen the screws on the lamp unitAttach the lamp cover After Replacing the LampReset lamp time Resetting Lamp TimeCleaning and Replacing the Filter Clean the filterReinstall the inner filter If the filter is damaged or too Dirty to be cleanedRS-232C Specifications Command FormatRS-232C Interface GNDVideo Video CompRS-232C Interface Exit MenuCinema NaturalRS-232C Communication Examples This section shows the communication examples of RS-232CAcquired Copyright and Caution About Trademarks and CopyrightPrecautions for Mounting Mounting this UnitSpecifications Component„ Top Surface Dimensions„ Bottom Surface Memo Meridian Audio Limited Meridian America Inc