Meridian Audio MF-10 manual Video Comp

ENGLISH

„Command and data

Operating command and data (Binary code)

Command	Type			Data description
0000	Connection check	Checks whether communication is available between this unit and
		the PC during standby.
		During standby
5057	Power supply	31	: Turns on the power.
		During power on
		30	: Turns off the power. (Standby mode)
		During power on
		30	: S-VIDEO
4950	Input	31	: VIDEO
		32	: COMP.
		36	: HDMI 1
		37	: HDMI 2
		During power on
		30	: Switches to “Normal”.
4754	Gamma table	31	: Switches to “Theater1”.
		32	: Switches to “Theater2”.
		33	: Switches to “Dynamic”.
		34	: Switches to “Custom”.
		30	: 1.8	35 : 2.3
		31	: 1.9	36 : 2.4
4750	Gamma coefficient	32 : 2.0		37 : 2.5
		33	: 2.1	38 : 2.6
		34	: 2.2
4752	Gamma data (R)	Sets the gradation (0 ~ 1023) of the output signal in hexadecimal.
		The data is 16 bit (2 byte) with the 2 byte data in the high/low order.
4747	Gamma data (G)	Same as gamma data (R).
4742	Gamma data (B)	Same as gamma data (R).
		During power on
5453	Test pattern	30 : Do not display.
		36	: Displays staircase (gray).
5243	Remote Control	Sends the same code as the supplied remote control.
		z“Remote control code” (pP47)

Getting Started

Preparation

Basic Operation

Settings

Troubleshooting

Others

45