InFocus X2 manual VGA connection, M1 to Component adapter

VGA connection

If your video device has a 15-pin VGA output, plug one end of the included computer cable into the VGA connector on your video source. This connec- tor may be labeled “To Monitor” on the video source. Plug the M1 computer end of the cable into the Computer In connector on the projector. Do not plug the USB end of this cable into the video device.

Use the A/V cable’s red and white audio connectors as described on the previous page (the yellow connectors on the A/V cable are not used).

connect computer and A/V cables

M1 to Component adapter

To connect a progressive scan DVD or HD source, use an M1 to Component adapter (available as an optional accessory). Connect one end of a compo- nent cable (not provided) into the adapter. Connect the M1 end of the adapter into the Computer 1 connector on the projector.

Connect the power cord to the Power connector on the side of the projector	connect power cable
and to your electrical outlet.

NOTE: Always use the power cord that shipped with the projector.

18