InFocus P760, P720, P740, IN76, IN74, IN72 manual Connector Panel, Volt DC output

Connector Panel

The projector provides the following connection options:

•M1-DA/DVI (Digital Visual Interface)

•HDMI™ (High Definition Multimedia Interface)

•Component (RCA)

•SCART RGB (you must enable this connector, see page 26)

•S-video

•Composite video (RCA)

See “Video connectors” on page 7 for details.

The projector also provides the following connectors:

•RS-232 for serial control (not included on the IN72)

•12 volt DC output (see below)







12 volt DC output

The 3.5mm mini-jack trigger provides a 12 volt, 0.25 amp DC output. It pro- vides a constant output while the projector is on. It has numerous uses. For example, if you connect your projection screen to the 12 volt DC output with the cable that came with your screen, when you turn on the projector the screen will move down; when you turn the projector off, the screen will return to the storage position.

component RCA

		M1-DA/	S-video	RS-232
	HDMI		composite
12 volt		DVI		(not on IN72)
			RCA

DC output

+12v

ground

3.5mm plug 12 volt DC output

to, for example, screen relay (see screen manufacturer for details)

4