InFocus X1 manual Displaying video, ? No start up screen? Get help on

Page 16

Displaying video

Remove the lens cap.

remove lens cap

 

toggle Power switch

Toggle the Power switch on the side of the projector to the On position.

The LED flashes green and the fans start to run. When the lamp comes on, the start-up screen is displayed and the LED is steady green. It can take a minute for the image to achieve full brightness.

? No start up screen? Get help on page 17.

Plug in and turn on your video device.

turn on video device

The video device’s image should appear on the projection screen. If it doesn’t, press the Video button on the keypad.

? No image? Get help on page 21.

Adjusting the image

Adjust the height of the projector by pressing the release button to extend

adjust height

 

 

 

 

 

the foot.

 

 

 

Rotate the leveling foot at the rear of the projector, if necessary.

 

 

rotate

elevator

 

leveling

 

 

 

foot

release button

foot

 

 

 

Position the projector the desired distance from the screen at a 90 degree

adjust distance

 

 

angle to the screen.

 

 

 

See page 40 for a table listing screen sizes and distances to the screen.

15

Image 16
Contents User’s Guide Page Safety Certifications Declaration of ConformityAustralian Certification C-tick mark Trademarks FCC WarningTable of Contents Introduction Positioning the projector On 169 and 43 modesRequired computer connections Connecting a computer sourceOptional computer connections Displaying a computer source image ? No start up screen? Get help onAdjusting the image Using the projector with Windows 98 for the first time Skip this page if you did not connect a USB mouse cable For WindowsWizard launches three times For Windows 2000, Windows ME, and Windows XPConnecting a video device Input Signal Connector Connector Label on Projector Video connectionsComposite video connection Video device connectionsVideo connection Component video connection VGA connectionDisplaying video Adjust the zoom and focus Troubleshooting your setup Shutting down the projectorToggle power switch Remove lens capRange Out Page Page Color Check lamp hours MainAbout Replace lamp Still need assistance? Using the remote control Troubleshooting the remoteUsing the keypad buttons Using the audioTroubleshooting Audio Presentation features Optimizing computer imagesOptimizing video images Customizing the projectorUsing the menus Picture menu Save User Settings Advanced menu Settings menu Startup Logo Blank Screen Language menu Cleaning the Lens MaintenanceReplacing the Projection Lamp Mentally proper manner Using the security lock Cleaning the Lamp Housing ScreensAccessories SpecificationsAppendix Projected image size Optional Accessories Part NumberDistance to screen Red LED Behavior and Projector Errors Red LED Behavior ExplanationNumerics Page USB Limited Warranty Warranty Limitation and ExclusionTo Be Eligible For Limited Warranty Coverage Limited Warranty PeriodTo Obtain Warranty Service