InFocus X1 manual Red LED Behavior and Projector Errors, Red LED Behavior Explanation

Red LED Behavior and Projector Errors

If the projector is not functioning properly and the LED is blinking red, con- sult Table 3 to determine a possible cause. There are two-second pauses between the blinking cycles. Visit www.infocus.com/service for more details on the red LED error codes.

	Table 3:
Red LED Behavior		Explanation
One (1) blink		The lamp won't strike after five (5)
		attempts. Check the lamp and lamp door
		installations for loose connections.
Two (2) blinks		The lamp counter hours have exceeded
		lamp life hours. Replace the lamp and
		reset the lamp hours counter.
Three (3) blinks		The projector has shut down the lamp.
		Check the lamp door. Replace the lamp.
		Contact Technical Support (see page 24)
		for repair if replacing the lamp does not
		solve the problem.
Four (4) blinks		The fan has failed. Contact Technical Sup-
		port (see page 24) for repair or replacing
		the fan.
Five (5) blinks		The projector is overheating. Check for a
		blocked air vent. Contact Technical Sup-
		port (see page 24) for repair if clearing
		the air vents does not solve the problem.

41