InFocus 740 manual Additional LiteMount Products, Placing the Projector

CEILING MOUNT INSTALLATION GUIDE

The LP 740 LiteMountTM makes it easy to hang your projector from the ceiling for fixed installa- tion use in meeting, auditorium and training room settings.

You must determine the suitability of this prod- uct for your intended use and assume all risk and liability in connection therewith. In Focus recommends that a professional contractor or other facilities professional assist you in mount- ing this device. Be sure to take precautions to meet all local building codes.

Additional LiteMount Products

In Focus offers two additional LiteMount prod- ucts that may make your ceiling mount installa- tion easier.

•The LiteMount False Ceiling Plate

(SP-LTMT-PLT) is designed for suspended ceil- ings with acoustic tiles. It mounts in your ceil- ing in place of a ceiling tile. It is pre- assembled with threaded studs to install the LiteMount brackets, and includes the neces- sary hardware to attach to the brackets.

•The LiteMount Pipe Tubing Extension (SP- LTMT-EXT) allows you to install the projector in a room with a high ceiling. With the exten- sion, you can place the projector from 24”

(61 cm) to 46” (117 cm) from the ceiling (12” to 24” with cut).

Contact your In Focus dealer to order these prod- ucts.

Placing the Projector

Refer to the LP 740 User’s Guide for image dis- tances and sizes to determine where to install the ceiling mount to meet your projection needs.

WARNING: This installa- tion must be performed in compliance with your local building code require- ments. Local require- ments take precedence over any instructions given in this guide.

1