InFocus PZ339-A000-00 manual Troubleshooting LiteBoard, Lithium Battery Information

Lithium Battery Information		- Make sure your projector is displaying the computer's screen and not some
Manufacturer: Shenzhen HYB Battery Co., Ltd.		other source (such as DVD, VCR, etc.). To change the source, press the
Model: J233		Source button on the projector or its remote.
Rating: 3.7V/800mAh		- Make sure the projector is displaying the same image as the computer's main
Caution: Lithium battery is only rechargeable, and not user replaceable. Not user
		or built-in monitor (don't extend your desktop onto multiple monitors). To
serviceable.
		correct this:
Troubleshooting LiteBoard™		On Windows XP: Open the Display control panel, click Settings, click the dis-
For the most up-to-date information, visit our support site at www.infocus.com/		play that represents the projector, then un-check “Extend my Windows desk-
		top...”.
support
		On Windows Vista: Right-click on the desktop, choose Personalize..., click
•	If the wand doesn't work at all, or it works intermittently, try one of these
		Display Settings, click the display that represents the projector, then un-check
	solutions::
		“Extend the desktop...”.
	- Press the tip, left or right button on the wand to turn it on.
		On both Windows 7 and Windows 8: Right-click on the desktop, choose
	- If the wand's blue Link light never blinks, then the wand's battery is fully dis-
		Screen Resolution, click the display that represents the projector, and then
	charged; connect the wand to a USB power adapter (not included) or your
		choose the “Duplicate Display...” under Multiple Displays.
	computer.
		On Macintosh: Select System Preferences from the Apple Menu, then select
	- Make sure the wand is not pointing at a shadow and make sure its tip is not
		Displays. Click Arrangement, and check “Mirror Displays.”
	in a shadow.
		If the battery light does not turn on when the wand is being charged, try one
	•
	- If the room is brightly lit, reduce the room illumination.	of the following:
	- If you're trying to use the computer's mouse at the same time as the wand,	- Make sure a USB cable is connected between the wand and either a USB
		power adapter (not included), or a USB port on your computer.
	point the wand away from the screen while using the mouse.
	- Reset the wand: push the end of a paper clip into the reset opening on the	- If the wand is connected to a USB power adapter (not included), make sure
		the adapter is plugged in to a live electrical outlet. If the wand is connected to
	underside of the wand.
		your computer, make sure the computer is powered on.
•	If accurate clicking is difficult, try one of these solutions:
		- If the wand still won't charge, contact InFocus support at: www.infocus.com/
	- Hold the wand steadier when clicking.
		support.

- Use the wand right up against the screen so it's easier to avoid unexpected movements.

•If the mouse pointer is in the wrong place on the screen, or the mouse pointer's movement is restricted to only part of the screen, try one of these solutions:

55