InFocus PZ339-A000-00 manual Status/Service, Timer, High Altitude Setting, Network Wired LAN

Page 31

Timer

Auto Off Time: automatically turns the projector off after no signals are detected for a preset number of minutes. If an active signal is received before the projector powers down, the image will be displayed.

High Altitude Setting

High Altitude: We recommend you turn on the High Altitude Mode when your envi- ronment is between 5000' (1500m) and 10,000' (3000m) above sea level.

Network

Wired LAN

DHCP: Abbreviation for Dynamic Host Configuration Protocol. This protocol automatically assigns IP Addresses to networked devices.

•When the “DHCP” is set to “On”, the DHCP server will assign an IP address to the projector automatically. This may take up to a minute.

•When the "DHCP" is set to "Off", the user will need to set the IP address manually.

IP Address: The numerical address used to identify devices on the net- work. This is only accessible when DHCP is set to Off.

•The IP Address is the number that identifies this projector on the network. You cannot have two devices with the same IP Address on the same network.

•The IP Address “0.0.0.0” is prohibited.

Subnet Mask: A numeric value defining the number of bits used in an IP Address when the network is divided into subnets. This function can only be used when DHCP is set to Off.

•The Subnet Mask “0.0.0.0” is prohibited.

Default Gateway: A server (or router) to communicate across networks (subnets) that are divided by a Subnet Mask. This function can only be used when DHCP is set to Off.

DNS: Setup DNS server address when DHCP is disabled.

MAC Address: Abbreviation for Media Access Control Address. A MAC Address is a unique ID number assigned to each network adapter. Apply: Save and execute the wired network settings.

Wireless LAN

SSID: Display the projector’s SSID information.

IP Address: a read-only display of IP Address.

Subnet Mask: a read-only display of Subnet Mask.

Restart Network: Restart network settings.

Status/Service:

Source Info: a read-only display of current source settings.

Projector Info: a read-only display of current projector settings.

Reset Lamp Hours: resets the lamp hours used counter in the Projector Info menu to zero. Do this only after changing the lamp.

Factory Reset: restores all settings to their factory default settings.

Service Code: only used by authorized service personnel.

30

Page 30 Page 32
Image 31
Page 30 Page 32
Contents IN2128HDa CE Warning Declaration of ConformityTrademarks FCC WarningAgency Approvals Table of Contents With local disposal laws Important Operating Considerations for SafetyIntroduction Product specifications Accessories Online registrationHdmi Connector panelOffset Positioning the projectorConnecting a computer source No start up screen? Get help on Displaying an imageBasic Menu Adjusting the imageVideo connection Connecting a video deviceVideo device connections Composite video connectionAuto Off Time Troubleshooting your setupIndicator Lights Shutting down the projectorResult Correct image Problem Solution No start up screenPress the Power button Only start up screen appearsDesktop icons Problem Solution ResultResolution. Varies per operating system Fuzzy or cropped Only my laptop’s background appears, notAdjust horizontal or Square image Problem Solution Result Image not squareColor Overheating indicator Result Lamp turns on Problem SolutionWon’t turn on Replace lampTroubleshooting the remote Using the remote controlUsing the projector’s speaker Using the audioTroubleshooting Audio Using the keypad buttons Optimizing computer images Presentation featuresCustomizing the projector Optimizing video imagesBasic Menu Using the menusBasic Menu Color Advanced MenuImage 3D ControlKeypad/Remote Settings SetupAudio Setup Image SetupLamp OSD SetupPIN Settings PowerNetwork Wired LAN Status/ServiceTimer High Altitude SettingEZ Media Multimedia EZ Suite MenuToolbar icon Action Displaying a pictureKey Action Pause Fast forward Rewind Play When audio is playing Music modeExit file list and return to EZ Suite main screen Office viewer modeBit Rate Kbps Supported file formats Images Image Format ProfileSize Limitation Audio Audio FormatSize Comment Version Limitation Subtitle Format Font Subtitle SizeOffice Viewer SupportEZ Display FeaturesRecommended System Configuration EZ DisplayIf you are in a non-DHCP environment Wired LAN connectionSetup Network Wirless LAN menu How to setup AP modeHow to setup client mode Wireless LAN connectionEZ Mobile EZ Suite SettingsEZ Miracast Web controlling the projector About Crestron e-Control Messages to your network administratorIii Category Item Input-Length Maximum Number CharactersCrestron RoomView Displaying Images through EZ Display Installation for Windows and MacintoshSystem Requirements Using EZ DisplayInstallation for Android and iOS Projecting from Smartphones/TabletsEZ Remote EZ Display Pix Viewer EZ Display Streaming Doc and Doc ViewerEZ Display Live Cam EZ Display Streaming Web EZ Display Dropbox EZ Display Split Screen Charging the Wand’s Battery How to Use the WandLiteBoard Wand How to Hold the Wand Using More than One WandWand Position and Avoiding Shadows Wand Features Lithium Battery Information Troubleshooting LiteBoardCleaning the lens MaintenanceUsing the security lock Replacing the projection lamp Advanced Menu Dhcp NumericsSsid

PZ339-A000-00 specifications

The InFocus PZ339-A000-00 is a versatile and innovative projector designed for both home and professional use. This model stands out due to its unique combination of portability, high-quality image projection, and advanced connectivity options that cater to modern users' needs.

At the heart of the InFocus PZ339-A000-00 is its impressive projection technology. It utilizes DLP (Digital Light Processing) technology, known for delivering sharp and vibrant images with high contrast ratios. This ensures that whether you're showcasing a presentation, watching a movie, or streaming content, the visuals are clear and engaging. The projector supports a Full HD resolution of 1920 x 1080 pixels, allowing for detailed images and making it suitable for various viewing environments.

One of the notable features of the PZ339-A000-00 is its compact design, making it highly portable. Weighing just a few pounds, it can easily be transported for on-the-go presentations or home use. Additionally, the projector includes a built-in battery, offering the convenience of cordless operation. This feature is particularly beneficial for those who need to set up quickly in different locations without being tethered to a power outlet.

The InFocus PZ339-A000-00 also caters to the demands of modern connectivity. It is equipped with multiple input options, including HDMI, USB, and wireless streaming capabilities. This means users can easily connect laptops, smartphones, tablets, and other devices for seamless presentations or entertainment. With its wireless functionality, the projector allows for easy screen mirroring, enabling users to project content straight from their devices without the hassle of cables.

In addition to its connectivity and projection capabilities, the PZ339-A000-00 offers impressive brightness levels, measured in lumens, ensuring that it performs well in various lighting conditions. Whether used in a dimly lit room or a brighter environment, this projector can deliver clear and vivid images.

Another key characteristic of the InFocus PZ339-A000-00 is its user-friendly interface, making it accessible for individuals of all tech levels. The intuitive controls and setup process enable users to quickly get started without needing extensive technical knowledge.

Overall, the InFocus PZ339-A000-00 combines advanced projection technology, portability, diverse connectivity options, and user-friendly design, making it an ideal choice for both casual users and professionals seeking reliable performance. Whether for work or leisure, this projector is well-equipped to meet various visual display needs.
Top Page Image Contents