Screen Save: automatically blanks the screen after no signals are detected for five minutes. The image returns when an active source is detected or a remote or keypad button is pressed. Screen Save is disabled when Power Save is enabled.
Screen Trigger: this enables the Screen Trigger connection on the connector panel. See page 6 for details.
Startup Logo: allows you to display a blank Black, White, or Blue screen instead of the default screen at startup and when no source is detected. It also allows you to capture and display a custom startup screen.
To capture a custom logo, display the image you want to capture on your computer, highlight Capture New, then press Select twice. While the cap- ture is underway, the LED on the keypad turns orange. When ready, the projector confirms the capture and the LED changes to green.
The next time you start the projector, the custom logo you captured dis- plays.
Blank Screen: determines what color is displayed when you press the Blank button on the remote.
Startup Logo
Blank Screen
34