InFocus LP 860 manual Connecting a computer, Required computer connections

Connecting a computer

connect computer cable

Required computer connections

Connect one end of the VESA computer cable to the Computer 2 connector on the projector. Connect the other end to the video port on your computer. If you are using a desktop computer, you first need to disconnect the moni- tor cable from the computer’s video port.

Connect the black power cable to the connector on the back of the projector	connect power cable
and to your electrical outlet.
NOTE: Always use the power cable that shipped with the projector.

Optional computer connections

To control your computer’s mouse using the projector’s remote control, con-	connect M1-D cable
nect the USB and DVI cables to the USB and DVI ports on your computer,
and connect the other end to the Computer 1 (M1-D) connector on the pro-
jector. USB drivers must be installed to use the USB feature. For more infor-
mation, see page 12.
If your projector cannot receive the remote’s signal due to IR interference,	connect wired remote
you can connect directly to the projector via a remote cable. To do so, plug
the remote cable into the wired remote connector on the projector. Plug the
other end into the connector on the remote,

To have sound with your presentation, connect the audio cable to your com-	connect audio cable
puter and to the corresponding computer Audio In connector on the projec-
tor.

8