INSTALLATION (continued)
Power Connection
Use the correct one of the enclosed power cords depending on the power outlet to be used. Connect the AC inlet of the projector to the power outlet firmly by the power cord.
CAUTION • Be carful in handling the power 
cord according to instructions of the accompanying manual "SAFETY INSTRUCTIONS" and this manual.
•Connect the power cord firmly. Avoid using a loose, unsound outlet or contact failure.
Power outlet
AC Inlet 
Power Cord
Example of system setup
Computer
(desktop type)
Recorder
|
| DIGTAL |
|
|
|
|
|
| RGB IN | 2 | |
| COMPO |
|
|
| |
|
| NENT |
|
|
|
|
| VIDEO | RGB OUT |
| CONTROL |
|
|
|
| ||
VIDEO |
|
|
|
|
|
(MONO)/L |
|
|
|
| |
AUDIO |
|
|
|
|
|
| R | CB/PB | AUDIO | IN | AUDIO |
USB |
| RGB 1 | RGB 2 | OUT | |
DIGITAL
CR/PR
Computer
(notebook type)
Display
Monitor
Speaker with amplifier
DVD Player
Computer (desktop type)
NOTE • When connecting with notebook computer, set to valid the RGB external image output (setting CRT display or simultaneous display of LCD and CRT). Please read instruction manual of the notebook for more information.
Plug & Play
This projector is VESA DDC 1/2B compatible. Plug & play is possible by connecting to a computer that is VESA DDC (Display Data Channel) compatible.
Please use this function by connecting the accessory RGB cable with RGB IN 1 terminal (DDC 1/2B compatible), or by connecting an optional digital RGB cable with DIGITAL terminal (DDC 2B compatible). Plug & play may not operate by other connecting.
NOTE • Plug & play is a system configured with peripheral equipment including a computer and display, and an operating system.
•This projector is recognized as a plug & play monitor. Use the standard display drivers.
•Plug & play may not operate by the computer to connect. Plug & play will not operate in the connection with Apple computer.