Onkyo CR-445 instruction manual Troubleshooting, CD Playback, Tuner, IPod / iPhone

Page 41

Troubleshooting—Continued

CD Playback

Playback jumps.

• The CD receiver is being subjected to vibration or the disc is scratched or dirty (see pages 11 to 12).

Can’t add tracks to the playlist for memory playback.

Make sure there’s a disc in the CD receiver. Also, you can only add valid track numbers. For example, if the CD contains 11 tracks, you cannot add track #12.

The disc will not play.

Make sure the disc has been loaded correctly, with the label-side facing up.

Check to see if the surface of the disc is dirty (see pages 11 to 12).

If condensation is suspected, unplug the power cord and leave CD receiver for two to three hours in the room temperature before playing any discs.

Some CD-R / RW discs may not be playable (see page 11).

It takes a long time for playback to start.

• It may take the CD receiver a while to read CDs that contain many tracks or files.

Can’t play MP3 / WMA DISCs.

Use only ISO 9660 Level 1 or Level 2 format discs (see page 11).

The disc has not been finalized. Finalize the disc.

Check whether the file format is supported (see page 11).

MP3 / WMA files without a “.MP3 / .WMA” or “.mp3 / .wma” filename extension are not recognized.

Tuner

Reception is noisy, stereo FM reception suffers from hiss, the Auto Preset function doesn’t preset all stations, or the ST indicator doesn’t light up when tuned to a stereo FM station.

Check the antenna connections (see pages 13 to 14).

Change the position of the antenna (see page 30).

Move the CD receiver away from a nearby TV or computer.

Cars or airplanes can cause noisy interference.

The radio signal will be weakened if it has to pass through a concrete wall before reaching the antenna.

Try setting FM mode to mono (see page 30).

Move power cords and speaker cables as far away as possible from the tuner’s antenna.

When listening to an AM station, noise may be heard when you operate the remote controller.

If none of the above improves the reception, install an outdoor antenna (see page 14).

If a power outage occurs or the power cable is disconnected.

If the preset stations are lost, preset them again (see page 31).

The clock and timer settings will be lost. Set the clock and timers again (see pages 36 to 39).

Can’t adjust the frequency of the radio.

• Use the remote controller’s [ ] / [ ] buttons to change the frequency of the radio.

iPod / iPhone

“Cannot Use HP” appears on the display.

When you select iPod as the input source, the headphones output no sound. Remove the headphones and use the speaker. If use headphones, connect it directly to iPod.

No sound

Make sure that your iPod is compatible with the system (see page 5).

Make sure that the iPod is securely inserted in the dock. Remove your iPod from its case before inserting it.

Confirm that the CD receiver’s INPUT is set to iPod, and that the iPod is set to PLAY.

iPod does not respond to the CD receiver buttons or enclosed remote control.

Confirm that the CD receiver’s INPUT is set to iPod.

Make sure that the iPod is securely inserted in the dock. Remove your iPod from its case before inserting it.

If the iPod is sleeping, wait for the iPod to wake up and start.

If “iPod No Device” is displayed, or “Reading” is displayed for a minute or more, remove your iPod once, wait a few moments and then connect it again.

41

Image 41
Contents CR-445 Important Safety Instructions Power PrecautionsInstalling this Unit Batteries and Heat ExposureFCC Information for User PrecautionsSupplied Accessories FeaturesInstalling the Batteries Before Using the CD ReceiverUsing the Remote Controller Open the battery compartment, as shownPage Rear Panel Getting to Know the CD ReceiverFront Panel Display Getting to Know the CD ReceiverRemote Controller Disc Notes Precautions for Inkjet Printable Discs Precautions for Rental DiscsDisc Notes Caring for DiscsConnecting the Indoor FM Antenna Connecting AntennasConnecting the AM Loop Antenna Attach the FM antenna, as shownUsing a TV / FM Antenna Splitter Connecting AntennasConnecting an Outdoor FM Antenna Terminal posts Connecting SpeakersConnecting a Subwoofer Connecting Other ComponentsConnecting Sound Reproduction Equipments About ConnectionsPlug the power cord into a suitable wall outlet Connecting Other ComponentsConnecting a TV Basic Operations Using the Super Bass Function Adjusting the Bass, Treble and BalancePress ENTER, and then use Buttons to adjust the balance Basic OperationsSelecting Tracks Using the CD ReceiverDisc Playback Displaying CD Information Disc PlaybackPress to select tracks Press to select foldersSelecting MP3 / WMA Files Selecting / Playing MP3 / WMA FilesVarious Playbacks Displaying MP3 / WMA InformationOne Folder Playback Use the number buttons to enter the file numberMemory Playback Random PlaybackRepeat Playback Setting Disc Preferences Preferences * default IPod / iPhone Playback Installing the iPod / iPhone Universal Dock AdapterPlaying iPod / iPhone Inserting your iPod into the CD receiver’s dock for iPodIPod / iPhone Playback Using the iPod / iPhone menu only remote controlDisplaying Music File Information Press the Menu / Clear button to display iPod menu on iPodTV Out? Setting for iPod / iPhoneCharging? Listening to the Radio Tuning into FM /AM Radio StationsAdjusting the Antennas Presetting FM / AM Stations Manually Presetting FM Stations Automatically Auto PresetListening to the Radio Displaying FM/ AM Radio InformationUse the / buttons to select a preset Selecting Preset StationsUse the Tuner or Input / buttons to select FM or AM You can also use the front panel controlsNaming Presets Erasing Presets Copying PresetsErasing a Preset’s Name Adjusting the Displays Brightness Displaying the Day and Time Setting the ClockProgramming the Timers Using the TimersAbout the Timers Timer indicator 1, 2, 3, or 4 will light Using the TimersChecking Timer Settings Turning Timers On and OffUsing the Sleep Timer Cancelling the Sleep TimerAudio TroubleshootingPower CD Playback TroubleshootingTuner IPod / iPhoneExternal Components TimersClock OthersGeneral SpecificationsAmplifier Section Tuner SectionOnkyo Europe Electronics GmbH UK Branch Onkyo Europe Electronics GmbH

CR-445 specifications

The Onkyo CR-445 is a compact yet powerful stereo receiver that has earned a reputation for delivering high-quality audio performance in a stylish package. Designed for enthusiasts of both music and home theater, this receiver is an excellent choice for anyone looking to enhance their listening experience.

One of the standout features of the Onkyo CR-445 is its impressive power output. With 45 watts per channel, this receiver is capable of driving a wide range of speakers while maintaining clarity and dynamic range. Whether you're listening to your favorite vinyl records or streaming music from digital sources, the CR-445 ensures that sound is delivered with precision and depth.

The receiver supports a variety of audio formats, catering to both traditional and modern listening preferences. It includes a built-in CD player and features multiple inputs for connecting external devices. With options like an auxiliary input, USB port, and phono input, users can connect everything from turntables to smartphones, making it versatile for any audio setup.

Another notable technology in the CR-445 is its advanced digital signal processing. This allows for enhanced sound customization, enabling users to adjust various sound parameters such as treble, bass, and balance to suit their personal tastes. The receiver also offers several preset equalizer settings to optimize audio playback based on the genre of music or type of audio content being enjoyed.

The CR-445 also stands out for its user-friendly design. The front panel features intuitive controls, including large knobs for volume and input selection, making it easy to navigate settings. Additionally, the compact size of the receiver allows it to fit seamlessly into any living space, whether on a shelf or as part of a larger home entertainment system.

For connectivity, the Onkyo CR-445 includes built-in Bluetooth technology, allowing for wireless streaming from compatible devices. This feature brings the convenience of modern music consumption to the user, facilitating easy access to streaming services and personal playlists.

In terms of build quality, the Onkyo CR-445 showcases a robust construction that not only enhances durability but also minimizes unwanted resonance, leading to improved sound fidelity. With its blend of classic design and contemporary features, the CR-445 is ideal for anyone seeking an engaging listening experience that does not compromise on style or functionality. Overall, the Onkyo CR-445 is a well-rounded stereo receiver that caters to both traditional audiophiles and modern music lovers alike.