InFocus C160 Connecting a video device, Standard video connections, Optional video connections

Connecting a video device

connect A/V cable

Standard video connections

Plug the audio/video (A/V) cable’s yellow connector into the video-out connector on the video device. Plug the other yellow connector into the yel- low Video 2 connector on the projector.

Plug a white connector into the left audio out connector on the video device and plug a red connector into the right audio out connector on the video device. Plug the remaining white connector into the left audio in connector on the projector, and plug the red connector into the right audio in connec- tor on the projector.

	R	S-video 1
computer 2	computer 1	serial control
	network
	L	video 2
monitor out	audio in
	computer in	video in

Connect the black power cable to the connector on the back of the projector and to your electrical outlet.

NOTE: Always use the power cable that shipped with the projector.

Optional video connections

If the video device uses a round, four-prong S-video connector, plug an S-video cable (sold separately) into the S-video connector on the video device and into the S-Video 1 connector on the projector. Use the A/V cable’s audio connectors as described directly above (the yellow connectors on the A/V cable are not used).

To connect a progressive scan EdTV or HD source, use the Component to M1 adapter (sold separately).

connect power cable

connect S-video and video cables

	R	S-video 1
computer 2	computer 1
	network	serial control
	L	video 2
monitor out	audio in
	computer in	video in

13