InFocus C160 manual Important Operating Considerations for Safety

Page 6

Important Operating Considerations for Safety

Place the projector in a horizontal position no greater than 15 degrees off axis.

Locate the projector in a well-ventilated area without any obstructions to intake or exhaust vents. Do not place the projector on a tablecloth or other soft covering that may block the vents.

Locate the projector at least 4' (1.2 m) away from any heating or cooling vents.

Use only InFocus-approved ceiling mounts.

Use only the power cord provided. A surge-protected power strip is recommended.

Refer to this manual for proper startup and shutdown procedures.

In the unlikely event of the lamp rupturing, discard any edible items placed in the surrounding area and thoroughly clean the area along all sides of the projector. Wash hands after cleaning the area and handling the ruptured lamp. This product has a lamp which contains a very small amount of mercury. Dispose of it as required by local, state or fed- eral ordinances and regulations. For more information see www.eiae.org.

Follow these instructions to help ensure image quality and lamp life over the life of the projector. Failure to follow these instructions may affect the warranty. For complete details of the warranty, see the Warranty section at the end of this user's guide.

Do not place objects or people in the 2 foot (.6m) area along the side of the projector. For ceiling mount applications, this area should be 5 feet (1.5m).

computer 2

 

 

computer 1

R

S-video 1

 

monitor out

network

 

computer in

L

serial control

 

audio in

video 2

 

video in

 

 

2 ft (.6m)

 

 

5 ft (1.5m)

4

Image 6
Contents User’s Guide Page $GREH$FUREDWSGI FCC Warning Declaration of ConformityTrademarks EN 55022 WarningTable of Contents Important Operating Considerations for Safety Included items Projector components and featuresIntroduction Online RegistrationConnector panel of C160 Connector PanelWireless Projection Connector panel of C180Connecting a computer Required computer connectionsOptional computer connections Connect network cable Displaying a computer image ? No startup screen? Get help onFirst-time projector use with Windows Wizard launches two times For Windows 2000, Windows ME, and Windows XPAdjusting the image Connecting a video device Standard video connectionsOptional video connections Displaying a video image Adjust the volume on the keypad or remote Troubleshooting your setup Shutting down the projectorLED behavior and meaning Only startup screen appears Computer image projectedNo computer image, just the words Signal out of range Computer Page Turn off Ceiling in SettingsSystem menu ColorLamp won’t turn on, LED blinking red Lamp turns onStill having problems? Using the keypad buttons Using the remote control Troubleshooting the remoteUsing the audio Troubleshooting audioConnecting external speakers Presentation features Optimizing computer imagesOptimizing video images Customizing the projectorUsing the menus Picture menu Presets Room Lighting Advanced settings Settings menu Startup Logo Blank Screen Effect Key Picture in Picture Network Language Service menu Network Info Maintenance Cleaning the lensReplacing the projection lamp Resetting the lamp timer Cleaning the dust filters Using the security lockOptional Accessories Part Number AccessoriesStandard Accessories Ship with the projector Part Number AppendixRed LED behavior and projector errors Projected image sizeRed LED Behavior Explanation Numerics DhcpLED XGA Limited Warranty Warranty Limitation and ExclusionLimited Warranty Period To Be Eligible For Limited Warranty CoverageTo Obtain Warranty Service Page If YOU Need Assistance