InFocus 760 manual Reference to the Remote Control Buttons, Menu, Standby, Arrow buttons

Page 28

Using the LitePro 760

Reference to the Remote Control Buttons

This section provides an alphabetical reference to the remote buttons. The names of the buttons are shown in bold.

menu

When you press menu, the LitePro menu appears at the top of the screen. Press menu again to remove the menu. When you remove the menu, the LitePro saves any changes you made. Refer to “Menu Functions” on page 22 for information about the menu functions.

standby

When you press standby, the projector turns off its lamp to conserve electricity. The fans remain on to keep the LCD cool. When the projec- tor cools sufficiently, the fans automatically turn down to a slower speed. Press any button on your remote to turn the lamp back on.

arrow buttons

The operation of the arrow buttons depends on whether or not the on-screen menu is displayed. When the menu is displayed, the left and right arrow buttons move the highlight bar to select a menu function. The up and down arrow buttons adjust the highlighted function.

When the menu is not displayed, the arrow buttons move the image in the direction of the arrow. If your image is wider than 1024x768 pixels, use the arrow buttons to pan to the edges of the image.

LitePro 760 User’s Guide

19

Image 28

Contents Fold and tear here If your computer is BNCPage Safety Certifications FCC WarningInstructions to User TrademarksPage Power Source Safety SummaryPower Cord Grounding FuseLamp Hot SurfacesContents Page Shipping Box Contents IntroductionCompatibility Cables and AdaptersIf You Need Assistance Usage Guidelines31 0 Page Connecting the LitePro Setting UpT e P r o T i p s Connecting your Computer If Your Computer is You will use Turn toConnecting a Sun, SGI, Intergraph or NeXT Workstation Connecting the LitePro LitePro 760 User’s Guide Connecting the LitePro Connecting the LitePro Connecting a Macintosh Connecting an IBM-Compatible Laptop Computer or SPARCbook Connecting a Macintosh PowerBook Powering Up the LitePro Turning the LitePro OffPage Using the Remote Control Using the LiteProFocusing the Image Adjusting the Height Reference to the Remote Control Buttons MenuStandby Arrow buttonsBrightness ContrastSync Using the Menu Selecting and Adjusting Menu FunctionsReturning to Default Settings Displaying the MenuMenu Functions Technical InformationRed GreenTrack LanguageRear Projection ColorsSwitching Projection Lamps ResetUsing the LitePro Page Maintenance Cleaning the LensReplacing the Projection Lamps Lamp Replacing Batteries in the Remote Control Bulb GuardReplacing the Fuse Maintenance Maintenance Page Troubleshooting Before You Call for AssistanceProblem Nothing on screen Solutions to Common ProblemsProblem Color or VGA text not being projected Problem Image is not centered on the screen Problem Only the test pattern is displayedProblem Image is too wide or narrow for screen Problem Image is out of focusProblem Image and menus are reversed left to right Problem LitePro displays vertical lines, bleeding or spotsProblem Image is noisy or streaked Problem Projected colors don’t match the monitor’s colorsAppendix Compatibility and CablingSystem Resolution Specifications Temperature DimensionsWeight AltitudeAccessories Standard Accessories ship with LitePro Part NumberPower Cords one ships with LitePro, depends on country Compatible ProductLCD Connector Cable Connector Pin AssignmentsInput Pin Signal Description Output Pin Monitor and Computer Connectors PinPortable and Laptop Activation Chart Key command to Computer Activate port De-activate portNCR Appendix Numerics IndexCables Index Macintosh Quadra, see MacintoshIndex Limited Warranty Part Number