Marantz PD5050D manual Basic Operations

Page 16

Basic Operations

POWER

To turn the unit ON and OFF:

1.Plug the power cord into an active AC power outlet.

2.Press the Power button (on the unit).

The monitor’s POWER/STANDBY indicator turns red and the standby mode is set.

3.Press the POWER ON button (on the remote control) to turn on the unit.

The monitor’s POWER/STANDBY indicator will light up (green) when the unit is on.

4.Press the POWER STANDBY button (on the remote control) or the Power button (on the unit) to turn off the unit.

The monitor’s POWER/STANDBY indicator turns red and the standby mode is set (only when turning off the unit with the remote control).

VOLUME

To adjust the sound volume:

1.Press and hold the VOLUME button (on the remote control or the unit) to increase to the desired level.

2.Press and hold the VOLUME button (on the remote control or the unit) to decrease to the desired level.

MUTE

To mute the audio:

Press the MUTE button on the remote control to mute the audio; press again to restore.

DISPLAY

To check the settings:

1.The screen changes each time the DISPLAY button is pressed.

2.If the button is not pressed for approximately three seconds, the menu turns off.

DIGITAL ZOOM

Digital zoom specifies the picture position and enlarges the picture.

1.Press the ZOOM (+ or -) button to display magnifying glass. ( )

To change the size of the picture:

Press the ZOOM+ button and enlarge the picture.

A press of the ZOOM- button will reduce the picture and return it to its original size.

To change the picture position:

Select the position with the ▲▼  buttons.

2.Press the EXIT button to delete the pointer.

OFF TIMER

To set the off timer:

The off timer can be set to turn the power off after 30, 60, 90 or 120 minutes.

1.Press the OFF TIMER button to start the timer at 30 minutes.

2.Press the OFF TIMER button to the desired time.

3.The timer starts when the menu turns off.

→ 30 → 60 → 90 → 120 → 0

OFF TIMER 30

To check the remaining time:

1.Once the off timer has been set, press the OFF TIMER button once.

2.The remaining time is displayed, then turns off after a few seconds.

3.When five minutes remain the remaining time appears until it reaches zero.

OFF TIMER 28

To cancel the off timer:

1.Press the OFF TIMER button twice in a row.

2.The off timer is canceled.

OFF TIMER 0

Note:

After the power is turned off with the off timer ...

A slight current is still supplied to the monitor. When you are leaving the room or do not plan to use the system for a long period of time, turn off the power of the monitor.

15

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Model PD5050D User Guide Important Safety Instructions Avertissment What is covered? What is excluded?Before requesting service To get warranty serviceImportant Information Avertissement Recommandations importantesDOC avis de conformation Precautions Plasma monitor cleaning procedureTo avoid damage and prolong operating life Recommendations to avoid or minimize phosphor burn-inPrécautions Mises en garde et précautions de sécuritéMéthode de nettoyage du moniteur à plasma Contents Installation Ventilation Requirements for enclosure mountingHow to use the remote control Battery Installation and ReplacementHandling the remote control Cable ManagementTurns the monitor’s power on and off Receives the signals from the remote controlPart Names and Function Front ViewRear View/ Terminal Board Remote Control Basic Operations When viewing videos or digital video discs Wide OperationsWide Screen Operation with Computer Signals When wide signals are input Supported resolution Normal size screen 43 or SxgaOSM On Screen Menu Controls Menu OperationsMenu Tree Main menu Sub menu Sub menu 3 Sub menuOnly when Auto Picture is OFF RGB/PC only  Restoring the factory default settingsPicture Settings Menu Storing picture settingsAdjusting the picture Reducing noise in the pictureSetting the color temperature Adjusting the color to the desired levelMaking the Low Tone adjustments Changing the Gamma CurveAdjusting the colors Adjusting the pedestal level black levelSetting the picture to suit the movie Audio Settings Menu Image Adjust Settings MenuSetting the allocation of the audio connectors Adjusting the Position, Size, Fine Picture, Picture ADJSET UP Settings Menu Setting the video signal format Setting the signal and black level for Hdmi signalSetting the background color when no signal is being input Setting the screen size for S1/S2 video input Setting the position of the menuResetting to the default values Turning on/off the menu displayFunction Settings Menu Setting the power management for computer imagesPOWER/STANDBY indicator Setting the Input SkipPeak Bright settings Orbiter settingsINVERSE/WHITE Settings Soft Focus settingsSetting Closed Caption Signal Information MenuReducing the brightness of Closed Caption External Control Pin AssignmentsTroubleshooting Symptom Checks RemedySpecifications PD5050D Signals PD5050D Supported resolution Table of Signals SupportedComputer input signals supported by this system Declaration of Conformity Is a registered trademark

PD5050D specifications

The Marantz PD5050D is a versatile and high-quality CD player that combines advanced technology with user-friendly features, making it a favorite among audiophiles and casual listeners alike. As part of Marantz's commitment to sound quality, the PD5050D employs a range of cutting-edge technologies to deliver an outstanding audio experience.

At the heart of the PD5050D is a high-precision HDCD decoder that enhances the playback of standard CDs, allowing for superior sound reproduction of the intricate nuances of music. The player’s digital-to-analog converter (DAC) is engineered for optimal performance, ensuring that it reproduces sound with remarkable accuracy and detail, making each listening session a truly immersive experience.

One of the standout features of the Marantz PD5050D is its ability to handle various disc formats, including CD-R and CD-RW, providing unbeatable flexibility for users who enjoy recording their own music. The player supports MP3 and WMA playback from compatible discs, allowing for a diverse range of audio formats to be played with ease.

The build quality of the PD5050D reflects Marantz’s attention to detail and commitment to audiophile standards. Its solid construction minimizes vibrations that can adversely affect sound quality, resulting in a cleaner, more defined audio output. Additionally, the player boasts an elegant design that fits seamlessly into any home audio system.

User convenience is another significant focus of the PD5050D. It features a clear and intuitive front panel layout, making navigation through tracks and settings straightforward. The inclusion of a remote control further enhances usability, allowing users to operate the player from a distance.

Moreover, the PD5050D incorporates advanced digital filtering options that allow listeners to tailor their sound experience according to their preferences. This level of customization sets it apart in a market saturated with standard CD players.

In summary, the Marantz PD5050D stands out due to its exceptional sound quality, versatile playback capabilities, and user-friendly features. It is an excellent choice for those who appreciate musical fidelity and seek a CD player that complements their home audio system with both performance and style. Whether enjoying a classic album or experimenting with digital formats, the PD5050D is designed to elevate the listening experience.
Top Page Image Contents