Hardware Reference - Flextight 343 | 7 | |
Front Panel | ||
|
Front Panel
English |
C |
D |
A |
E |
B |
Figure 1: Front panel features of Flextight 343 |
AFeed Table: place original holders here for scanning. The table can be folded up to keep dust from entering the scanner and to keep it out of the way.
BLight Area: for viewing originals. The grid helps you to align the originals.
CIndicator light: The indicator can light up in 3 different colors indicating the following:
Green (Power/Ready) - remains lit when ready to scan. Flashes when first installed to indicate that firmware must be loaded (it will be loaded automatically when you run FlexColor).
Yellow (Motor Drive) - when drum is repositioning.
Red (Scanning) - when scanning. Do not touch the scanner while the indicator is red. If the light is flashing when not scanning, then an error has occurred - please contact your Flextight dealer for assistance.
DPower Switch: press to turn the unit on/off.
EOriginal Holder Clasp: all original holders slide into a slot here and are held in place by magnets.