–Reset Lamp Life
When replace the lamp unit, before the Lamp Life becomes "0" hours need to reset lamp life.
When the user selectsReset“Yes”, the followingLifemessage appears:
Yes Lamp No?
Again, select “Yes”, and pr ss the ENTER key. Then the lamp life is initialized.
–Reset All
All settings goes to theResetfactory default settings except the lamp life.
When the user selects “Y s”, theAllfo lowing message appears:
Yes ?No
Again, select “Yes”, and press the ENTER key.
Trigger2
Select 12V DC or 0V from on and off at each aspect mode. Full, Normal, Zoom, and Through.
On: Output DC 12V.
Off: No output.
PictureAdjust | Full |
|
Setting | Normal |
|
Display | Through | Off |
Config | Zoom | |
Trigger2 |
|
|
Memory |
|
|
This allows such as a powered dual aspect screen according to the aspect mode.
OPERATIONS
Memory
Recall the stored memory for preference. The unit has three | ENGLISH | |||
picture modes: THEATER, STANDARD, and DYNAMIC. | ||||
Each picture mode has three picture memories. | ||||
PictureAdjust | Mode | Standard | ||
| ||||
| ||||
Setting |
| 1 |
| |
Display |
|
|
| |
ConfigTrigger2
Memory
–Store memory
Select Memory mode from THEATER, STANDARD, or DYNAMIC using the Remote Controller or in the above menu. Display Picture Adjust menu. Adjust any items, and these figures are automatically stored.
19