Problem | Solution |
|
|
Edges of image distorted | Turn overscan on in the Picture |
| Advanced menu. |
|
|
Image not sharp | Adjust sharpness in the Picture |
| Advanced menu. |
|
|
Image does not fit 16:9 screen | Change aspect ratio to 16:9 in the Picture |
| Aspect Ratio menu. |
|
|
Image upside down | Turn off Ceiling in Settings |
| menu. |
|
|
Image reversed | Turn off Rear in Settings |
|
|
Video image ″torn″ or fragmented | Change Video Standard in Picture |
| Advance menu. |
|
|
Projected colors do not match source | Adjust color, tint, color temperature, |
| brightness, and/or contrast in the menus. |
|
|
Lamp won’t turn on; LED blinking red | v Make sure vents are not blocked; allow |
| projector to cool for one minute, or |
| v Replace lamp (see “Replacing the |
| projection lamp” on page 25). |
|
|
Image not centered on screen | v Move projector; adjust zoom and/or |
| height, or |
| v Adjust horizontal or vertical position in |
| the Picture |
|
|
28IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide