to pan the image, displaying different parts of it (only if the image is magnified). To return to the original size and cancel Zoom, press the Effect button a second time.
vAbout: The default effect. It displays the About menu.
Network: The projector has an RJ45 Ethernet connector that supports network connections and TCP/IP protocols. This will allow for the control and management of the projector over a corporate network. The following fields are accessible when DHCP is not checked and available for manual entry of data.
vIP Address: Identifies the projector on the network.
vSubnet mask: Separates the network address part of the IP address.
vDefault gateway: The IP address of the local router.
vDHCP: Select this to automatically obtain an IP address, subnet mask, and default gateway.
vNetwork Info: Provides information on the network configuration.
The Network Info menu is informational and cannot be edited. It displays the current IP address, subnet mask, default gateway, and the projector’s MAC address.
Language: Allows you to select a language for the onscreen display of menus and messages.
Service: To use these features, highlight them and press Select.
vFactory Reset: Restores all settings (except Lamp Hours and Network settings) to their default after displaying a confirmation dialog box.
vLamp Reset: Resets the lamp hours counter in the About menu to zero. Do this only after changing the lamp. It displays a confirmation dialog box.
vService Code: Only used by authorized service personnel.
24IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide