Attention: This product contains a Metal Arc Lamp, which contains Mercury.
Dispose of it as required by local ordinances and regulations.
The USA restricts or prohibits the disposal of some or all lamps containing mercury in the municipal waste stream. Please visit www.lamprecycle.org for more information on specific state disposal requirements and recycling facilities.
For users in Connecticut, please call Northeast Lamp Recycling
Resetting the lamp timer
After replacing the lamp, you should reset the lamp timer to zero. Please follow these steps:
1.Press the Menu button to open the main menu.
2.Press the left/right cursor button to move to the Information menu.
3.Press the up/down cursor button to move down to Lamp Hour Reset.
4.Press the Enter button. A message screen appears.
5.Press the cursor buttons in this order: down, up, left, right. The Information menu appears again showing the Lamp Hours reset to zero.
Attention: Lamp Life is a measure of brightness degradation only, and is not a specification for the time it takes a lamp to fail and cease light output. Lamp Life is defined as the time it takes for more than 50% of a lamp sample population to have brightness decrease by approximately 50% of the rated lumens for the specified lamp. For example, if the defined life of your lamp is 2000 hours of run time, your lamp will have decreased its brightness by 50% to approximately 550 lumens.
Using the security slot
The projector has a security slot. Refer to the information that comes with the lock for instructions on how to use it.
Appendix A. Maintenance