Fine Menu, Frc, Cec | Marantz VP-11S1 specification

Fine Menu 1

Fine Menu 2

ENGLISH	By adjusting this Fine Menu, you can make fine picture adjustment.

	Standard 1
	Picture Adjust	Sharpness	0
	Fine Menu 1	Noise Reduction	0
	Fine Menu 2	R Gain	0

Input Signal	G Gain	0
RGB/HD Adjust	B Gain	0
Display	R Bias	0
OSD/Blanking	G Bias	0
Config.	B Bias	0

Standard 1

Picture Adjust

Fine Menu 1

Fine Menu 2

Input Signal

RGB/HD Adjust

Display

OSD/Blanking

Config.

Cinema	Auto
VCR Mode	On
Black Level	0 IRE
FRC	Auto
CEC	Off
Picture Shift V	0
Luminance Gain	0
Chroma Delay	0

Item	Adjustments
Cinema	Auto, Off
VCR Mode	On, Off
Black level	0 IRE, 7.5 IRE /Expand,
	Normal (For HDMI input)
FRC	Auto, On
CEC	On, Off
Picture Shift V	-50Ô0 Ô50
Luminance Gain	-50Ô0 Ô50
Chroma Delay	-5Ô0 Ô 5

Item		Adjustments
Sharpness	0	50
Noise Reduction	0	50
R Gain	-50Ô0Ô 50
G Gain	-50Ô0Ô 50
B Gain	-50Ô0Ô 50
R Bias	-50Ô0Ô 50
G Bias	-50Ô0Ô 50
B Bias	-50Ô0Ô 50

–Sharpness

Adjust the sharpness.

–Noise Reduction

Adjust the noise reduction.

–R Gain

This menu allows the users to set the gain for red.

–G Gain

This menu allows the users to set the gain for green.

–B Gain

This menu allows the users to set the gain for blue.

–R Bias

This menu allows the users to set the bias for red.

–G Bias

This menu allows the users to set the bias for green.

–B Bias

This menu allows the users to set the bias for blue.

Note :

•The settings made in Fine Menu 1 are saved in the currently selected Picture Mode index (Default excluded).

–Cinema

Auto : Automatically selects the cinema mode when a video signal is input. NTSC: 3-2 pull down, PAL: 2-2 pull down

Off : Pull-down processing is not performed.

–VCR Mode

On : A projector is forced into the intra-field only deinterlacing mode.

Off : A projector is used with external field memories and operates in the full set of deinterlacing modes, i.e., motion adaptive video deinterlacing and full frame film source deinterlacing using 3:2 pulldown detection (2:2 pulldown for 625/50 sources).

–Black level

Select the black level by a video source.

–FRC (Frame Rate Conversion)

Auto : Frame Rate Conversion function is basically off. However FRC turns on automatically depending on vertical frequency of input signal.

On : Frame Rate Conversion function is “On”. (60Hz fixed)

–CEC (Chroma Error Correction)

On : Reduces CUE (Chroma Up-sampling Error) of 1080i signals.

Off : Normally, use this mode.

–Picture Shift V

When Aspect on the Picture Adjust menu is set to “Zoom”, this setting allows the user to move the projected image vertically in order to see parts on the image not appearing on the screen.

–Luminance Gain

This menu allows the users to set the luminance gain.

–Chroma Delay

This menu allows the users to set the chrominance delay.

Notes :

•There are some parameters can not adjust according to input signal.

•The settings made in Fine Menu 2 are saved in each currently selected input signal source.