Gateway none manual Attach the Gateway to the Internet, Making WAN Connections

2.4.4 Attach the Gateway to the Internet

If Internet services are provided through an xDSL or Cable modem, use unshielded or shielded twisted-pair Ethernet cable (Category 3 or greater) with RJ-45 plugs to connect the broadband modem directly to the WAN port on the Gateway. Use either straight-through or crossover cable depending on the port type provided by the modem (see Appendices "B. Cables"). For ISDN or PSTN service, attach the access device to the RS232 serial port on the Gateway.

Figure 2-5. Making WAN Connections

Note:When connecting to the WAN port, use 100-ohm Category 3, 4 or 5 shielded or unshielded twisted-pair cable with RJ-45 connectors at both ends for all con- nections.

CHAPTER 2

2-13