7.8 I would like to turn on/off the lamp
The default of the lamp is OFF. When using the remote control or control panel:
1.Press [MENU] to enter the setting menu.
2.Press [] or [] to select [Display].
3.Press [] to the [Lamp].
4.Press [] or [] to select [Off/Arm lamp/Both Lamps/Head lamp].
5.Press [MENU] to exit.
7.9I would like to freeze images
1.Press [FREEZE] on the remote control to freeze the current image on the screen. Press again to defreeze.
7.10I would like to capture images
7.10.1Capturing and saving images
1.Press [CAPTURE] on the remote control or control panel to
capture and save images.
You cannot capture images when the capture mode is set to [Disable]. If it is set to [Continuous], you can capture images continuously. Press [Capture] to start capturing continuously, or press [Capture] again to exit.
To change the quality of captured images, please refer to 7.10.2 Setting the quality of captured images.
To change the settings of captured images, please refer to 7.10.3 Setting continuous capture.
7.10.2Setting the quality of captured images
1.Press [Menu] on the remote control or control panel to enter the setting menu.
2.Press [] or [] to the [Storage] menu.
3.Press [] to find [Image Quality].
4.Press [] or [] to select among [High/Medium/Low].
5.Press [Menu] to exit.