2.1Press [MENU] on the remote control or control panel to enter the setting menu.
2.2Press [] or [] to the [Setting] menu.
2.3Press [] to enter [Projector Type].
2.4Press [] or [] to select [LCD/DLP].
2.5Press [MENU] to exit.
7.20I would like to resume the factory default settings (Factory Reset)
7.20.1Using OSD menu
1.Press [MENU] on the remote control or control panel to enter the setting menu.
2.Press [] or [] to select [Advance] menu.
3.Press [] to select [Factory Reset].
4.Press [] or [] to select [Yes].
5.Press [ENTER] to activate.
7.20.2Use Compound Key
1.Use the control panel, and press [ENTER] + [MENU]
simultaneously to restore the initial value.
<Note> Before using the compound keys, please remove all
7.21 I would like to change the Start Video/Off Video
<Note> The file size of the Start Video/Off Video should be less than 5MB and the AVI file in H.264 compression format should be used.
7.21.1 Changing the Start Video
1.Press [ENTER] + [] on the control panel to enter Service Menu.
2.Press [] or[] to select [Pwr On] menu.
3.Press [] to [Image Select] and press [ENTER] to read the saved file.
4.Press [] or [] or [] or [] to select the picture file and press [ENTER] to apply the change.
5.Press [] to [Start Video Select] and press [] or [] to select [Default Video/ Customer Video].