Connecting the Speakers, Operating Precautions

SKR-L500.fm Page 3 Tuesday, October 4, 2005 2:15 PM

Connecting the Speakers

Read the following before connecting your speakers:

•Turn off your amp before making any connections.

•The nominal impedance of these speakers is 6 Ω. Use only an amp that supports this impedance.

•Pay close attention to speaker wiring polarity. Con- nect positive (+) terminals to only positive (+) termi- nals, and negative (–) terminals to only negative (–) terminals. If the speakers are wired incorrectly, the sound will be out of phase and will sound unnatural.

•Be careful not to short the positive and negative wires.

Doing so may damage your amp.

Using Speaker Mounts/Brackets

Threaded inserts for 5 mm machine screws are provided on the rear and buttom of the speaker for wall-mounting with commercially available speaker mounts and brack- ets. Refer to the manual supplied with your mounts or brackets for installation details.

Note:

The portion of the screw that goes into the speaker’s threaded insert should be between 5 mm and 9 mm long.

Mount or bracket

5 mm

5–9 mm

■Connecting the Speaker Cables

1Strip the insulation from the ends of the speaker cables,

and twist the bare wires tightly.

2	Use the cables to connect speaker’s input
	terminals to the corresponding speaker
	output terminals on your amp.
	To make a connection, while
	pressing the terminal lever,
	pressing the terminal lever,
	insert the wire into the hole, and



	then release the lever.


	Make sure that the terminals are
	gripping the bare wires, not the insulation.

Operating Precautions

The speaker can handle the speciﬁed input power when used for normal music reproduction. If any of the fol- lowing signals are fed to them, even if the input power is within the speciﬁed rating, excessive current may ﬂow in the speaker coils, causing burning or wire break- age:

1.Interstation noise from an untuned FM radio.

2.Sound from fast-forwarding a cassette tape.

3.High-pitched sounds generated by an oscillator, elec- tronic musical instrument, and so on.

4.Ampliﬁer oscillation.

5.Special test tones from audio test CDs and so on.

6.Thumps and clicks caused by connecting or discon- necting audio cables (Always turn off your ampliﬁer before connecting or disconnecting cables.)

7.Microphone feedback.

•The speaker contain strong magnets, so do not put magnetic or iron objects such as screwdrivers close to them. If you do, the object may be attached to the magnets, causing personal injury or damage to the diaphragm.

SKR-L500

Surround back

SKM-L500S

SKF-L500

speaker (right)

speaker (left)

Surround right

Surround left

Front left

Front right

speaker

Brown

SURROUND BACK SPEAKERS SURROUND SPEAKERS

FRONT SPEAKERS

SKC-L500C

Center speaker

CENTER SPEAKER

SKR-L500 specifications

The Onkyo SKR-L500 is a high-performance speaker system designed to elevate your home audio experience. This versatile set of speakers is ideal for both music enthusiasts and home theater aficionados, providing rich, immersive sound that brings your favorite content to life. One of the standout features of the SKR-L500 is its advanced driver technology, which includes a robust 5-inch woofer and a 1-inch tweeter. This combination allows for clear and detailed highs while delivering powerful low-end frequencies, ensuring a balanced audio profile across a wide range of genres.

The SKR-L500 employs a cutting-edge frequency response range, typically spanning from 40 Hz to 20 kHz. This broad range ensures that listeners can enjoy every nuance in music and film soundtracks, from the thumping bass lines of modern tracks to the subtle details in classical compositions. Additionally, the speakers feature high-efficiency design, allowing them to produce high-quality sound output even at lower power levels, making them an excellent choice for both small and large rooms.

Another significant aspect of the SKR-L500 is its sleek and modern aesthetic, designed to blend seamlessly with any home decor. The cabinet is constructed from high-quality materials, providing durability while also minimizing resonance for cleaner sound reproduction. The speaker terminals are also designed for easy connectivity, accommodating various audio sources, including receivers and amplifiers.

The SKR-L500 also features advanced technologies such as bi-wiring capability, allowing users to connect separate amplifiers for the low and high-frequency drivers. This feature enhances the overall sound quality by reducing distortion and improving clarity, particularly at higher volumes. Additionally, the speakers are tuned for optimal performance, providing an engaging listening experience that captivates audiences.

In conclusion, the Onkyo SKR-L500 speaker system stands out due to its high-quality construction, advanced driver technology, and modern design. Whether you are enjoying your favorite film, hosting a gathering, or simply relaxing with music, the SKR-L500 provides an exceptional audio experience that will satisfy even the most discerning listeners. Its combination of performance, aesthetics, and versatility makes it a worthwhile investment for anyone looking to enhance their sound system.