Gateway FPD2200 manual Introduction, Features

Page 3

Introduction

The FPD2200 Flat Panel Monitor has an active matrix TFT (Thin-Film Transistor) LCD (Liquid Crystal Display).

Features

The FPD2200 is a 22-inch (55.8cm viewable) intelligent micro-processor based monitor.

This monitor can be connected to a VCR or DVD. The monitor has two signal connectors (D-sub and DVI-D) so that it can support both an existing analog input (D-sub) and an advanced standard digital input (DVI-D). Two computers can be simultaneously used while connected to this monitor.

This monitor has a picture-in-picture function so that you can watch from VCR/DVD while using a computer.

The aspect ratio of the monitor is 16:10 so that you can feel as if you are watching a film in a theater. You can also simultaneously display two pages of a document set to an A4 size on the monitor, so that working efficiency can be improved.

Digitally controlled auto-scanning is done with the micro-processor for horizontal scan frequencies between 30 and 70kHz, and vertical scan frequencies between 56 - 61Hz.

We accomplished to adapt the advanced design and technology to the monitor. Soft touch buttons on the front panel are simple and allow you to conveniently adjust a variety of image controls.

This monitor has DDC 2B function.

A1

Image 3
Contents Page Contents Introduction FeaturesOn Safety Important PrecautionsOn Installation On CleaningOn Repacking Front Panel Controls Description of ControlsLocking slot Rear Panel ControlsUsing the Computer Connecting the MonitorSub Connection of external equipment Connecting the VCR/DVDOn Screen Display OSD Control Adjustment Adjusting the Screen when Using a Computer On Screen DisplayOSD Selection and AdjustmentA11 A12 Adjusting the Screen when Using VCR/DVD V1 Video Memory Modes Display Modes ResolutionCheck the following before calling for service TroubleshootingDisplay Specifications