JVC DLA-G15U manual Aspect

Operating the Main Menu (Cont.)

Setting and Adjusting Other Functions (OPTIONS) (Cont.)

■Remote control unit

MENU/ENTER

OPERATE	button
	COMPUTER VIDEO

	T
VOL.	ZOOM	FOCUS
	W
PAGE	MENU/ENTER
BACK
PRESET
		Cursor buttons
QUICK		AV
ALIGN.		MUTING

PAGE BACK button

■Submenu items

[OPTIONS menu]

Adjustment item	Button				Adjustment content
		Sets background color when there is no input
		signal. (Factory setting : BLUE)
BACK COLOR	2/3	BLUE			CYAN		BLACK		GREEN
		YELLOW				RED		MAGENTA
		Sets the color temperature of the video image
		being projected. Make adjustment when the
		image becomes reddish or bluish. (Factory
		setting : MIDDLE)
		LOW : Color temperature decreases
COLOR	2/3			(video image becoming reddish).
TEMP.		MIDDLE : Results in middle color
				temperature.
		HIGH : Color temperature increases
				(video image becoming bluish).
			LOW			MIDDLE		HIGH
		Sets the vertical-to-horizontal ratio (4 : 3 or 16

:9) of the video image projected. (Factory setting : 4 : 3)

4 : 3 : The aspect ratio of the screen

ASPECT	2/3		becomes 4 : 3. Set it to 4 : 3 for video
CHANGE			of NTSC, NTSC4.43, PAL, SECAM.
		16 : 9: The aspect ratio of the screen
			becomes 16 : 9. Set it to 16 : 9 for Hi-
			Vision devices (W-VHS VCR, etc.)
		4 : 3		16 : 9
		Sets the length of sleep time which
		automatically brings the projector into stand-
		by state. You can select one of the following
SLEEP TIME	2/3	sleep times : 10 minutes, 20 minute, 30
		minutes, and 60 minutes. (Factory setting :
		30 minutes)
		10	20		30	60

ENGLISH

O P T I O N S

M E N U A U T O O F F	N O
L I N E D I S P L A Y	O N
R I G H T L E F T R E V .	O F F
T O P B O T T O M I N V .	O F F
C L A M P	B P
R E S I Z E	O N
B A C K C O L O R	B L U E
C O L O R T E M P .	M I D D L E
A S P E C T C H A N G E	4 : 3
S L E E P T I M E	3 0 M I n .
L A M P T I M E	1 0 H .

Notes

•The selected item is shown in magenta color. Items shown in gray color cannot be operated or set in the current mode.

•Items to be set (adjusted) are different when AV signals are input and when computer-system signals are input.

¦To return to the main menu, press the PAGE BACK button. To finish the main menu, press PAGE BACK again.

•To finish the menu display from the submenu display (OPTIONS menu), press PAGE BACK twice.

Note

•When you view a conventional (normal) 4 :3 video picture, which is not wide video picture, on the projector’s screen the aspect change function, the upper and lower parts of the video picture become partially invisible. View such an original video picture in 4 :3 mode, respecting the producer’s intention.

45