JVC DLA-RS15, DLA-HD990, RS-232C, DLA-HD950, DLA-RS25, DLA-RS20, DLA-RS10, DLA-RS35 Infrared Control

Page 14

JVC D-ILA Projector Remote Control Guide

Infrared Control

It is also possible to control JVC D-ILA projectors via Infrared Remote Control Signal Emulation, though is this sometimes slightly more difficult to achieve than RS-232C control due to the differences in Infrared emulation methods between the various equipment manufacturers.

To send an Infrared command to the projector, the required format is 73, followed by the ASCII value in hex of the command required. The ASCII values for all of the Remote Control Emulation Commands are shown in right hand column of the Remote Control Emulation Command tables on pages 4-6.

As an example, to send the Power On command, we would send: 73 05

It is unlikely that these raw commands will work with proprietary Infrared controllers and they will have to be converted to the appropriate format before use. For the most common Infrared control system, the Philips Pronto, the widely available free “MakeHex” program should be able to convert the codes from this document into the “Long hex” format used by Pronto and other similar systems. Full details of how to carry out the conversion are included with the MakeHex program. When using MakeHex, you should set “Device=73” in the MakeHex .irp input file.

Some controllers are able to create Infrared Commands from the hex Remote Control Emulation Codes on pages 4-6. Where this is possible, it is a matter of personal preference as to which of them should be used.

Document Version History:

Version

Date

Details

1.0

01/06/2009

First Version

1.1

21/09/2009

Added new codes for DLA-HD550/HD950/HD990/RS15/RS25/RS35.

 

 

Added RS-232C Interface Details.

 

 

Added additional Video Source Status Response.

 

 

Other minor corrections and amendments.

Produced by Gary Broadbent – JVC(UK)

V1.1 – 21/09/2009 – E&OE

© 2009 JVC

This document may be distributed freely as long as the author and copyright information remain intact.

Please email any corrections, suggestions or requests for more information for the attention of Gary Broadbent at: info@jvc.co.uk

This document may be updated from time to time. To download the most recent version, go to:

http://uk.jvc-service.net/public/document.cfm?prog=docu.cfm&Model=DLA-HD350&SGK=0&SGT=0&MLDC_id=6776

Page 14 of 14

Image 14
Contents DLA-HD990 DLA-RS10 / DLA-RS20 DLA-RS15 / DLA-RS25 DLA-RS35 RS-232C Command Types IntroductionDirect Commands PowerRemote Control Emulation Commands Hex Code AsciiCommand Hex Code Ascii Converting & Testing Codes Hercules Setup Utility Free fromAcknowledgement Response Return Codes Basic Function Acknowledgement ResponsePower Status to confirm the current Power Status Acknowledgement Response Return Codes AdvancedGamma Value to confirm the current Gamma Value Input Status to confirm the current Video InputGamma Table to confirm the current Gamma Table Source Status to confirm the current Video Source StatusModel Status to confirm the current Projector Model DLA-RS15RS-232C Interface Details ConnectorDiagram of Data Format Communication ParametersError Handling Command FormatCommand Section Size CommentsInfrared Control
Related manuals
Manual 6 pages 27.35 Kb Manual 59 pages 4.51 Kb Manual 179 pages 55.19 Kb Manual 20 pages 980 b